Mine is Local Send which is a FOSS alternative similar to air drop that works across a variety of devices.

  • xthexder@l.sw0.com
    link
    fedilink
    arrow-up
    16
    ·
    3 months ago

    A Raspberry PI should be fine for direct play, but it doesn’t really have the processing power to transcode. Check to see which mode you’re in.

    If you want the ability to live transcode, you’d probably have better luck with an old laptop or PC with a dedicated GPU (Even the lowest end ones have the same video encoding hardware in each generation, I use a GTX 1050).

    • maiskanzler@feddit.nl
      link
      fedilink
      Deutsch
      arrow-up
      3
      ·
      3 months ago

      Or a somewhat recent Intel Computer, maybe around 2017 onwards or even older. It can absolutely be a low-tier device As long as the processor has Intel Quicksync it’ll be a breeze to do live transcoding. No dedicated graphics necessary!

      • yonder@sh.itjust.works
        link
        fedilink
        arrow-up
        6
        ·
        3 months ago

        I remember how the jellyfin documentation specifically recommends against RPIs since they have no hardware transcoding. I personally use a 4th gen i3 in a mac mini and it can do what I want, though I don’t use it heavily.

    • skoell13@feddit.org
      link
      fedilink
      arrow-up
      1
      ·
      3 months ago

      This. I have an LG Oled TV that can nearly trascode everything so I didn’t allow my user to use transcoding and forcing it to do direct play (there is also a plugin for it). Works like a charm. The only thing not supported are VobSubs but otherwise I had no issues.