kozmost@lemmy.world to Comic Strips@lemmy.world · 5 months agoScientific Discoverieslemmy.worldimagemessage-square19linkfedilinkarrow-up1572arrow-down17
arrow-up1565arrow-down1imageScientific Discoverieslemmy.worldkozmost@lemmy.world to Comic Strips@lemmy.world · 5 months agomessage-square19linkfedilink
minus-squareMac@mander.xyzlinkfedilinkEnglisharrow-up7·5 months agoMetric tape is good to ~1mm +/- 0.5 in my experience.
minus-squareagamemnonymous@sh.itjust.workslinkfedilinkarrow-up4·5 months agoI would trust it that far for flat, square pieces of metal; not for an irregular shape with a rounded tip, mounted to an irregular rounded surface. For this use I’d want a steel ruler at minimum.
Metric tape is good to ~1mm +/- 0.5 in my experience.
I would trust it that far for flat, square pieces of metal; not for an irregular shape with a rounded tip, mounted to an irregular rounded surface. For this use I’d want a steel ruler at minimum.