I have a questions I haven’t found answered anywhere, but maybe someone here can help out.
First, some background:
I have bought this silica gel with indicator a while ago and have used it in my AMS and also for storing my filament in ziplock bags.
I now want to dry some of the silica gel, and have looked at the various options there are. I want to rule out the use of my kitchen appliances, as I am not fully convinced of the silica with indicator being really fully non-hazardous. I also recently bought a Creality Space Pi dryer, which I would like to use for drying my silica as well. Of course I would need to print a container for that, and since I only have PLA and PETG available at the moment, I wouldn’t be able to drive the dryer too hot.
Online you can find many different opinions about the ideal drying temperature for silica gel, ranging from 60°C to 145°C.
Efficient energy usage is no big concern for me with this, as my PV modules produce a lot of excess power during the current season.
Question:
What temperature should I dry the silica gel at, and does a longer drying time at lower temperature equal the same results as a quicker drying at higher temperature?
Or does higher temperature actually remove more humidity overall, which a lower temperature can maybe not achieve regardless of time?
I use a small hotplate at about 125 degrees and an aluminium baking tray. If you spread the beads out thinly it will dry pretty quickly.
Alternatively you can use an old microwave and that should remove moisture from the silica gel in a matter of minutes. You can easily overheat them though and I would never use that microwave for food again.