If that’s really the definition, it’s an awful definition and exactly why we shouldn’t regulate stuff like this. Torx are objectively better than Philips or flathead in every possible way.
As long as the tool isn’t proprietary it’s acceptable. If I can go to a hardware store and buy the interface tool then it’s fine, but it’s not fine if I have to get it from a special manufacturer or if it’s proprietary.
In the case of Nintendo I gave; Nintendo have their proprietary tri-headed screw. They do not make The tri-headed screwdriver publicly available, of course companies have copied them and so you can get one that way, but they’re not official, so my understanding is that that would not be acceptable. Nintendo would have to officially release the tri-headed screw design, and they’re probably just more likely to switch to a different already public screw design.
I also think they are allowed to just glue the batteries in as long as they have pull tabs. Which is probably the better option.
My point is Apple won’t be allowed to just come up with some brand new screw design that no one else has ever seen before. Unless they open source the screw head. In which case I guess it doesn’t matter. But they’re not going to do that because there would be no point.
That’s the reason I bought a set of screwdrivers for apple and there was also the tri-headed included. It was just 5 bucks and I am really happy with them.
Anyway, I just hope they go further in their law like a replacement without any screws. Why not just use the way a laptop battery will be changed? Just click it out easy.
Well if you broaden the definition that much, then it sounds like iPhone batteries are already user replaceable since I can easily purchase the necessary tools from iFixIt.
Again, this is not official. Just because somebody has grogged a way too interface with their proprietary screw heads doesn’t mean that the design is public domain, and the requirement is that the tool set is public domain.
Apple’s screw heads are not better than Phillips heads so they’re only doing it to be awkward that’s the point, they’re not allowed to do that anymore. So just because you can technically get the screwdrivers doesn’t make it acceptable.
You’re acting like I’m being unreasonable I’m just telling you what the law is it’s not my fault you haven’t read up on it
Most batteries are currently held in with some sticky glue, so I’m sure 4 random off the shelf screws would be sufficient. We’re not mounting plasma screen TVs to plasterboard here.
As someone who works with small electronics, Phillips is NOT perfectly fine at small sizes. Below a PH1, the torque required to unscrew a long thread and the torque required to cam-out and strip the head get very close together.
I just stripped half the screw head in my steam deck because none of my bits would fit just exactly right. I’d have been thrilled about finding torx there.
If that’s really the definition, it’s an awful definition and exactly why we shouldn’t regulate stuff like this. Torx are objectively better than Philips or flathead in every possible way.
As long as the tool isn’t proprietary it’s acceptable. If I can go to a hardware store and buy the interface tool then it’s fine, but it’s not fine if I have to get it from a special manufacturer or if it’s proprietary.
In the case of Nintendo I gave; Nintendo have their proprietary tri-headed screw. They do not make The tri-headed screwdriver publicly available, of course companies have copied them and so you can get one that way, but they’re not official, so my understanding is that that would not be acceptable. Nintendo would have to officially release the tri-headed screw design, and they’re probably just more likely to switch to a different already public screw design.
I also think they are allowed to just glue the batteries in as long as they have pull tabs. Which is probably the better option.
My point is Apple won’t be allowed to just come up with some brand new screw design that no one else has ever seen before. Unless they open source the screw head. In which case I guess it doesn’t matter. But they’re not going to do that because there would be no point.
That’s the reason I bought a set of screwdrivers for apple and there was also the tri-headed included. It was just 5 bucks and I am really happy with them.
Anyway, I just hope they go further in their law like a replacement without any screws. Why not just use the way a laptop battery will be changed? Just click it out easy.
Well if you broaden the definition that much, then it sounds like iPhone batteries are already user replaceable since I can easily purchase the necessary tools from iFixIt.
Again, this is not official. Just because somebody has grogged a way too interface with their proprietary screw heads doesn’t mean that the design is public domain, and the requirement is that the tool set is public domain. Apple’s screw heads are not better than Phillips heads so they’re only doing it to be awkward that’s the point, they’re not allowed to do that anymore. So just because you can technically get the screwdrivers doesn’t make it acceptable.
You’re acting like I’m being unreasonable I’m just telling you what the law is it’s not my fault you haven’t read up on it
It’s pre-drilled holes and small screws, Phillips is perfectly fine.
Most batteries are currently held in with some sticky glue, so I’m sure 4 random off the shelf screws would be sufficient. We’re not mounting plasma screen TVs to plasterboard here.
As someone who works with small electronics, Phillips is NOT perfectly fine at small sizes. Below a PH1, the torque required to unscrew a long thread and the torque required to cam-out and strip the head get very close together.
I agree that Torx might be better for things that require a lot of torque, but mobile phones?
I just stripped half the screw head in my steam deck because none of my bits would fit just exactly right. I’d have been thrilled about finding torx there.