Hi, my current setup is the following

Windows server pc with hyperV (it’s a weird choice I know but I wanted to experiment with stuff I’m also using at work) hosting some VMs:

  • OPNSense (doing dhcp server)
  • owncloud (personal cloud)
  • pihole

Till yesterday I had a fix public IP to reach my owncloud via port forwarding from my work laptop and as well my two desktop (outside my network)

Can you suggest a more secure way of doing it? Any general other suggestion to make my setup better?

Thank you

PS: i have no budget constrain but I’m usually not prompt to waste money :D

  • NarrativeBear@lemmy.worldEnglish
    1·
    10 months ago

    Tailscale would be the most “secure” as you have no ports open and only you can access it. Keep in mind your services will only be accessible by you along as all your devices connect to your tailscale instance. Sharing access is possible but will require some explanation.

    Wireguard is another option, just as secure as the first option, it will need one port open but the port only responds if you are connecting with proper keys/authentication. Like tailscale you can only access your services if connected to your wireguard instance.

    Reverse Proxy, any version you choose will work, it depends on your preference of layout and user interface. Nginx proxy manager, haproxy, traefik. Each accomplish the same with different levels of setup, I listed them in my ease of use. If you use pfsense as your router haproxy installation is easy and there are plenty of guides about setup. Nginx proxy manager you can also find a bunch of setup videos where it’s running on home assistant.

    With a reverse proxy you will open port 443 and in your firewall rules point it at your reverse proxy. Your proxy will then direct traffic to any one of your services. You will need a domain name so you can access service1.mydomain.com or service2.mydomain.com from anywhere on the web.

    With a reverse proxy and any public website I recommend to run them behind a ddns like CloudFlare. You can do this for free and it helps protect your services against DDoS, bots/crawlers, and it obscures your HomeLab IP, as all incoming traffic goes through CloudFlare and then get directed to your HomeLab.

    Additional security that can be implemented within your firewall is to block all traffic not originating from your country, or even only allow specific IP addresses.

    I use a combination of all this above where a few services run publicly accessible, and everything else is accessed through tailscale or wireguard. Internally I run haproxy on pfsense where public service are proxied.

    I also run nginx proxy manager for my local services, this allows me to access my local services such as service1.local.mydomain.com with a full SSL certificate. So once I connect to my home network with tailscale/wireguard I can type in these domain names into my browser. At some point I will move these into haproxy with its own frontend for internal services.

    • ShortN0te@lemmy.mlEnglish
      2·
      10 months ago

      Tailscale would be the most “secure” as you have no ports open and only you can access it. Keep in mind your services will only be accessible by you along as all your devices connect to your tailscale instance. Sharing access is possible but will require some explanation.

      Wireguard is another option, just as secure as the first option, it will need one port open but the port only responds if you are connecting with proper keys/authentication. Like tailscale you can only access your services if connected to your wireguard instance.

      I disagree. Tailscale has a much higher attack surface since the network is controlled by a separate entity, tailscale. As on pure wireguard, you would need to first compromise one of your clients to get into the network.

      Also tailscale is a much higher value target since you could compromise thousands of devices/networks/communication with ‘just’ compromising the vendors network.

      • NarrativeBear@lemmy.worldEnglish
        2·
        10 months ago

        You have an excellent point, it seems like tailscale would have a larger attack surface.

        I wonder if credentials are hashed in some way on tailscale servers, so even with an attacker gaining access to their servers it would essentially be useless to them.