I spent all day today trying to get the routing to work correctly between Tailscale, Nginx and Adguard.

Basically I wanted to be able to be able to use **http://immich.network ** to route to 192.168.1.2:9000

I wanted to share the steps I took so people don’t have to go through what I did.

First a few things Local Server IP: 192.168.1.2

  1. I installed Ngnix and Adguard, in a Docker Containers, and gave Adguard IPs 3000, 3001 instead of 80 and 443 because Ngnix took it.
  2. I went to my router and made it use the DNS: 192.168.1.2
  3. I configured Proxy Host in Ngnix … immich.network => 192.168.1.2:9000
  4. I configured DNS rewrite in Adguard … *.network => 192.168.1.2

At this point I was able to use http://immich.network finally. I installed Tailscale to be able to access when I’m outside but http://immich.network didn’t work.

These helped me https://tailscale.com/kb/1019/subnets + https://tailscale.com/kb/1054/dns?q=global+nameserver

  1. I created a subnet… tailscale up --advertise-routes=192.168.1.0/24
  2. I approved it on Tailscale login

At this point I was able to access home server using its local IP 192.168.1.2 but I couldn’t get http://immich.network to work.

  1. I created a nameserver dns with split DNS but I used my local ip… 192.168.1.2 => network

Finally everything is working… I have a feeling that I’m doing it wrong but I’m too tired and it’s finally working.

  • dutchkimble@lemy.lolEnglish
    1·
    7 months ago

    Thanks, it took some prompts but it worked in the end! I used a few subdomains of an actual domain I use for email…

    • Mir@programming.devOPEnglish
      1·
      7 months ago

      I just finished the SSL today, but have you gotten Syncthing GUI to work though? I can’t seem to get it to work with the domain for some reason.

        • Mir@programming.devOPEnglish
          1·
          3 months ago

          It took me a week suffering to get syncthing to work but it finally did. Thank you

      • dutchkimble@lemy.lolEnglish
        1·
        7 months ago

        No, sorry I haven’t tried it with Syncthing. Mainly using it for immich, seafile, a matrix server, some arr apps and a status monitor called dashdot. Would be useful for syncthing though, never thought of trying it - I’ll give it a shot over the weekend and let you know how it goes!