Would be so kind as to suggest a printer for me? I have no experience at all with 3D printers or 3D modeling. But I am super interested and have electronics and coding knowledge. I would like to print things like brackets, enclosures for custom circuit boards, organizers, keyboard plates, etc. Ideally I would like to spend around $300USD, but I am open to going as high as $500USD if it would save me headaches and make the experience more enjoyable and streamlined.
Please suggest something for me and let me know if I didn’t provide enough information. One final note, I live in range of a microcenter if that is a factor.
You must log in or register to comment.
As other people have mentioned, Prusa and Bambu make the most reliable printers on the market. The plus side to Bambu is the price. They are definitely cheaper than prusa printers.
However, I would make sure to be aware of the controversies surrounding Bambu. This is not a deal breaker for many people, but it wouldn’t be right not to at least take a glance at them. Especially considering you are on Lemmy.
This is where Prusa shines. They have not had nearly the same amount of controversies. Their hardware, firmware, and software are all open source. They also have amazing customer support. As others said, a used Prusa can be found within your price range.
This is just something to know of. I know a lot of people who are happy with both brands, and you can’t really go wrong either way. I just think this is another thing to consider.
What is the controversy? I’m probably as open source supporting as the next lemming.
I’m not fully in the loop, but I believe Bambu is pretty blatant about taking everything from the open source community and never giving back. And Josef Prusa even claims that Bambu Labs intentionally uploaded stolen models to Prusa’s site, Printables, in order to see how Prusa handles it - so Bambu can reverse engineer Prusa’s internal processes and clone them to Bambu’s new website, MakerWorld
In addition
-
They have filed some controversial/anti-innovative patents.
-
Their printers phone home with encrypted information. Last I checked, there were speculated security and privacy issues with it, though someone should correct me if this was resolved.
-
They only open source their slicer because of the GPL licence, but they don’t open source anything else (firmware, hardware, etc).
Again, I just recommend people look into these things before they buy a printer. Do your own research and come to your own conclusions :)
-
Bambu firmware is closed source. I’m 100% happy with my Bambu, but that being said, Prusa makes amazing printers. However, like everything else, it comes with a price. Buying used is an option, just note you’ll ideally want to see it in person and printing before plunking down cash. As good as their printers are, you could still be buying someone else’s problem.
Do you want the printer to be a tool, or a hobby (i.e. you don’t mind fiddling with the printer itself to improve the results, you don’t mind spending more to upgrade components, etc)?
If the printer itself is a hobby you can go cheap, but if you want something reliable you don’t have to mess with or upgrade, I’d suggest getting something as nice as you can afford, maybe a Prusa mini or Bambu A1 mini if you don’t care about open source. Also consider something like a used Prusa Mk3.x.
Definitely more in the tool side. I want to print stuff that works. Thank you for the suggestions. Are used printers easy to find? How well do they hold up? I’m assuming I would be buying one from someone who is upgrading to something better.
Prusa mini or bambu are definitely common. Mk3(s/s+) will also be common, maybe even more so.
Steer away from Creality if you want consistent and easy printing: it’s a tinker machine.
I love my prusa mini, but if your using it for practical stuff, the size of it’s build area can be limiting.
I haven’t bought used myself, but based on my own experiences with my printer (MK4; I love it) I don’t think there’s a ton to worry about buying a used quality printer. I would not buy a used low-end printer because the odds are much higher that the seller found it frustrating.
A used Prusa MK3S is probably an excellent choice if a Prusa MK4 kit is out of your budget and a Bambu printer is out of your budget or doesn’t meet your other requirements. The seller probably either realized they don’t actually print often, or upgraded to a MK4 (or XL if they had the budget). While you can upgrade a MK3S to MK4 with Prusa’s upgrade kit, the cost of the kit is so close to just buying an MK4 that it’s not worth doing (and Prusa admits this; they only offer it because of the flak they got for not doing such a kit in the past). The MK3.5 or 3.9 upgrade kits could make sense for some people…but in many cases someone looking to upgrade would likely leave the MK3S untouched and just buy an MK4.
deleted by creator
Speaking as a new hobbyist (2 months), I went with an Creality Ender 3 V3 KE. The cost was in the $250-300 USD range and it had a decent range of features.
I’ve used it almost every day since unpacking it. It’s pretty easy to get to know. The Creality cloud slicing tool is good enough for me (for now), and can be run via a browser or app.
Microcenter has a variety of display models that you can check out. If I had known about it I probably would have gone prior to making my selection. I’m not sure my choice would have been different, but a little extra knowledge never hurts.
Looking at random Facebook marketplace postings I’d say you should go with a mk3s from Prusa. In NYC I’m seeing them for $350-$500 used and they’re fantastic printers. Very much on the tool end of the tool:hobby spectrum.
Used Prusa MK3s
Right, lots of suggestions for Bambu and Prusa and rightfully so. But their prices are high and while they are worth it, they wouldn’t be what I’d suggest for a first time printer.
The Ender 3 is what I’d suggest, though not the V1. The S1 or the v3 and good starting points for being in budget and having some modern features.
This isn’t like the mid 2010’s where it was hit or miss and the printers will have a slight chance of burning your house down. Hictop anyone? But these days even a $200 printer is good enough to start printing.
That said software is going to be your biggest pain point.
For the slicer make sure its compatible with PrusaSlicr or Cura. Preferability the former. This makes the models to print, and some cheep third party slicers makes their own with questionable quality and support.
For modeling, you have some options. Blender if you are looking to design 3d shapes like clay. Fusion360 is a cheap and free (while limited) solution for parametric cad design. With TinkerCAD is a good in between. But like Photoshop is to gimp, Fusion 360 is to FreeCAD and it may be worth learning how FreeCAD works since its an extremely flexible tool.
TL:DR Ender 3 V3/S1, Prusa Slicer, Cura, Blender, TinkerCAD, Fusion360, FreeCAD and you should be too to start printing and making brackets.
I don’t have any experience with resin printers yet but have been poking around at FDM for the better part of a decade. In that price range (for FDM), I’d likely suggest a Creality K1C. It is not going to likely match the BambuLab printers but it’s a great departure from previous by Creality, requiring little to no tinkering to make it work. If you can spare around $1k, and don’t care about proprietary stuff, BambuLab X1 series is about the most turnkey that I know of. But, again, the Creality is (surprisingly) right there too with the K1C.
Note: It is probably possible to get similar results with mods to a K1 or K1Max - the nozzle brush seems to be critical to the K1C’s reliability.
I’m late to the party and brand new, but I just went through what you’re going through. I ended up buying an A1 based on the potential ability to add AMS later on and potentially print ABS/ASA.
I was heavily considering an Ender 3 V3 KE, but a few mentioned they just wished they would’ve gone Bambu, even though they had success with their KE. I just don’t have as much time to futz with stuff as I’d like right now, and I want something that’s relatively easy for my kids to use.
If you’re tight on budget and like the tinkering aspect, I saw an eBay store oddly enough named SovolOfficial, that sells unrepaired and/or refurbished Enders for extremely cheap prices. Like around $50usd for Ender 3’s. If it went for the time and kiddo aspect, I’d be all over that, modding along the way.
Thanks for the input. I am leaning towards the A1. I don’t have prusa money for my first printer and I’m iffy on getting a used one because I don’t know what to look for to make sure it’s ok. If I went with the ender, based on what everyone has been saying, it might just become another in a long line of complex projects I start and never finish. I’d like to start printing things right away to get solidified in the hobby/craft.
Lots of different ways to get into it. I personally love my Elegoo printers (An older Neptune 2S and a Neptune 3 Pro)
Bambulab A1 mini
