30021190

Looks like Three doesn’t block it…

Statping-ng has had some updates beyond the base.

Snorkeling is probably your best choice as it did show latency overall and not just up/down.

Write your own selinux module with audit2allow.

I’m not at work so I can’t find the guides I use but this looks similar https://danwalsh.livejournal.com/24750.html

Myself over NFS can have serious latency issues. Some software can’t correctly file lock over NFS too which will cause write latency or just full blown errors.

iSCSI drops however can be really really bad and cause full filesystem corruption. Also backing up iSCSI volumes can be tricky. Software will likely work better and feel happy however and underlying issues may be masked until they’re unfixable. (I had an iSCSI volume attached to vmware silently corrupt for months before it failed and lost the data even though all scrubs/checksums were good until the very least moment).

You can make your situations with with either technology, both are just as correct. Would get a touch more throughput on iSCSI simply down to the write confirmation being drive based and not filesystem locks / os based.

YMMV

I’ve had issues with this too and reverted back to rooted docker. I even tried podman and system NFS mounts that it binds too with varying issues.

It looks like you can’t actually do this with podman for varying reasons.

Poor parts consistentcy and my previously mentioned issues.

Might just be me getting a bad batch though.

Do you have any issues? I used to find that the T420 series were hot garbage… Trackpads that didn’t always work, the nipple mouse never worked, keyboard keys being soft stickied and no external hdmi.

Do you have a guide?

Power line adaptors

Same… Although maybe I’m just searching niche problems.

Hadrian’s wall still stands… Although in most places it’s easy to cross 😂

It also helps reduce draughts directly on the first layer even minimal can help adhesion.

DL380 G9. Those bioses don’t support booting from PCIe at all.

They actually do but it can only be a HPE supported BootROM… anything non-HPE is ignored (weirdly, some Intel and Broadcom cards PXE boot without the HPE firmware but not all).

Most of these boards have internal USB and internal SD slots which you can boot from with any media, intact HPE sell a USB SD card raid adaptor for the usb slot. So I would recommend using SD card for this…

Other than fulling up storage, what is the actual issue? If the image is orphaned then surely nobody can actually access the content? Sure you could be blind hosting things but if nobody can get the content back out then the abuse is surely minimal apart from say a complex cyber and physical targetted campaign or simply fulling up storage…

Ports 80 and 443.

The cli is easy and you could just Cron (scheduled task) a bunch of commands to open the firewall, renew cert and close the firewall. It’s how I do it for some internal systems.

I’m not sure about anything you’re running but I would look into certbot.

Either using the basic web plugin or DNS plugin. Nginx would be simpler, you’d just have to open your web ports on certificate generation to pass the challenge.

I know some proxy tools have let’s encrypt support, such as traefik.

Surely a 1:1 emulator would just run DRM as expected and it would never know… Feels like it may stop day1 piracy via emulators but anything beyond I’m sure would be patched.

This is pretty cool. Perfect idea for a small standalone Lemmy instance.

You also have Teams for Linux which is compatible with Microsoft Teams (Work)but no longer supported. It however isn’t compatible with Microsoft Teams (Personal) but if you try to use Microsoft Teams on Linux for personal use, it tells you to install the now non-existant Teams for Linux that only works with Microsoft Teams (Work).

There’s also two different versions of logging out in Teams for Linux, Logout and Log Out. Both of which log you out but only one lets you log in as a different user.

Don’t get me started with the Microsoft Teams PWA that is now the “way to use Teams on Linux” but isn’t the Teams PWA that installs if you try the normal way…

All hail Microsoft Teams! At least I can stream the games I’m playing to my work meetings so people know I’m skiving.

It’s for work and that’s all…