Nvidia shield with a custom launcher. Google updated their Android TV home which made 60% and More of the dashboard just ads so I added projectify as my launcher. There are now only 2 apps being shown on my screen. Plex and Google Play (for updating apps).
You know, I was really sick and tired when they updated the nvidia shield with the new android TV version that makes most of the screen show stuff that are basically ads. It didn’t even let me show only stuff I was interested in and this constant “oh you are hovering over this item for 0.000001s so you seem to be interested in this, let me start the video for you with audio” no god damnit I was reading something else or got a text.
I had to install a different launcher so that I could only show on the screen what I actually wanted to see. I have basically removed or reduced all ads as much as I ca.
Lately, I was at my parents place and they don’t have that stuff. Even the 1.5 minutes of ads for a free service is so disruptive to me watching something.
What has this to do with PlayStation?
Well, on the shield you are still able to install a custom launcher that is more to your liking, you could disable the internet access and completely stream your own local content. But on the PS, you don’t have that option and are completely at the mercy of what they think you should watch and see on your screen that you bought with a console that you also bought with your own money.
Short answer: Because their motivation is to win!
I read something about this in the Book “Introduction to Game Design, Prototyping, and Development: From Concept to Playable Game With Unity and C#” by Jeremy Gibson a while ago, maybe that can explain this a bit.
Basically, every Player has some Intention or the “Player Intent” which is described by the Personality Types of Richard Bartle. For example, you have:
And then you have two others that you will be encountering:
So, the motivation to “cheat” could either be that this player doesn’t really care about the game, is able to get away with cheating and just wants to beat the game. According to Jeremy Gibson, a cheater might not cheat if they can win legitimately but I would argue that cheaters are usually not great players in the first place so the bar would be pretty low for them to “win legitimately”.
As for the spoilsport, this is extremely hard to work against or prevent because the motivation isn’t about the game anymore but other players, to make their experience miserable so that the spoilsport can gain satisfaction from it. Hence also the use of “don’t feed the trolls”.
With that being said, when you ask why someone would cheat, the question would rather be “What is their motivation” and the answer to that is “to win the game, at all costs”. And, most of the time, they will get away with this because they apparently cannot be caught as quickly as they can still continue doing it, if there is any action against them at all.
I totally agree. I had it a few times in which someone calls me, rips me out of my thoughs, we discuss something, hang up and I have nothing retained from what we talked about. Or, even better, someone says something on a call and I do that and then they never said anything about that.
Even worse, I can’t listen to the conversation in 1-2 weeks because that is the time I could actually work on it and remember every detail that we talked about.
Now I am strictly going with emails. Sure they can call me and we talk about the feasibility or discuss possible solutions but any request for implementation has to happen either over an email of which I then create a ticket/issue or they create one directly themselves.
That way I can prove that what I implemented was based on what was requested and if that was wrong then the request wasn’t clear enough.
Mountain Man: 10 Books by Keith C. Blackmore. Basically, the Zombie Apocalypse happens and a Dude tries to survive alone, physically, mentally and emotionally while also trying to go on supply runs, running into Zombies and generally trying to stay alive while coping with everything. I think it would be good to have some other zombie-related Series that isn’t The Walking Dead.
Expeditionary Force: 18 Books by Craig Alanson. Earth and Humanity are attacked by Hamster Aliens, another alien Race, Lizards, who attack the hamsters saving Earth in the process and then recruiting Humanity into a war on a galactic scale but the Hamsters aren’t the real enemy of Humanity. I’m only at the end of the 5th Audiobook but they are great and I would really wish Skippy is voiced by the Audiobook Narrator R.C. Bray in a TV adaption.
Kyralia series: Been a while since I read it but a fantastic series related to magic By Trudi Canavan, I think there are just not enough good Magic-related Shows.
Tales of the Otori: A 5-Book Series by Lian Hearn is set in a fictional feudal Japan. The Main story follows a Boy, Takeo, through his life to avenge his adoptive father and escape the legacy of his biological father. Probably the only series in which I had to put down the book at one point and just had to process what was happening.
I tried it but it doesn’t seem to work for me correctly or maybe I am doing something wrong. I patch the YouTube app and install it but as soon as I close and open it, all the changes made by the patch are apparently gone. Shorts that are hidden on the first start after the patch are visible again, ads seem to be reduced but still happen occasionally.
I disabled the default YouTube app, gave the patched version a different name, disabled auto update, repatched it but nothing seems to stick after opening it again.
And then the whole “I have to download the apk so that I can use it” because I don’t have rooted my phone is just inconvenient.
I stick with my yt-dlp server and Plex instead.
The health check that Tdarr can do depend on what health check you select, the “quick” health check will only check the file headers. This probably won’t find any video corruption unless the file headers are corrupted or invalid.
The thourough health check will basically do a transcode of the input file without an output. This is being used to run and check each single frame of the file and “process” it without actually producing an output. https://trac.ffmpeg.org/wiki/Null
Would this screw with plexs own traditional transcoding?
No, Plex and Tdarr are two completely different things.
Transcoding is not some universal thing but rather a term to describe what is happening. In general “transcoding” means that you convert something from one format into another.
When you use the processing pipeline through Tdarr, it would detect a file in your library and run it through your specified pipeline. Depending on what you want to do with the file and how the pipeline is configured, it might or might not do anything with that specific file. When you, for example, configure that you want any file that has a video stream that isn’t encoded with HEVC to be HEVC then a H.264 file would then be transcoded.
This is on a “replacement” bases, so any file you run through this would replace the existing file in your library. Meaning: you have a H.264 file before tdarrs processing and after it is finished, you have the file with HEVC as video stream.
With the health check, as explained above, this is a bit different since you don’t have an ouput file, there is also no replacement happening. It is just a “check” that the file can be transcoded in its entirety (with a thourough health check).
When Plex transcodes something, this is done “on the fly”. This means that it only transcodes the current file in your library.
Technically, tdarr could “screw” with the Plex transcoder when Tdarr processes a file while you yourself watch the same file that is then transcoded by plex. When Tdarr is finished, it would replace the file which then could throw off the Plex transcoder. But this is very rare or non existent and you could even configure tdarr to do those things only at a certain time and it wouldn’t happen with health checks. as someone who runs both, I have yet to come across something like this.
Or does it attempt to repair a file by transcoding
As the name suggests, health checks are only “checking” if the file is healthy, there is nothing being repaired here. While you might be able to repair the file header, a corrupted video or audio is not something you can repair because of missing information. But that is nothing that Tdarr will do anyway, it just verifies/checks if it is healthy or not.
From the very low amount of information, there isn’t much to go by so the usual would have to be checked.
OP should definitely use the new agents, again, anything other than the official agents are unsupported and shouldn’t be used unless you use a specific metadata agent for a specific source. If that is tmdb, tvdb or imdb then the new agents will work just as fine if not better.
Then the usual suspects would need to be checked. Naming convention being followed, content not being merged into other episodes etc.
So if the new season is not appearing inside the show, it either wasn’t detected because of the file naming or merged with some other content (filter -> duplicates).
Without any further information, there is very little to speculate further
A bit of clarification here because this is a mistake I have seen too many make.
The first thing is that You should only use the Plex Series and Plex Movies Agent. They are the official and up-to-date Agents that you need. All other Metadata Agents like TheTVDB and TheMovieDB are outdated and unmaintained. The new Metadata Agents are also faster than the old ones, Unless you use some specific 3rd Party Agents, the Plex Series and plex Movies Agent are more than enough for you because they get their metadata from watch.plex.tv which aggregates them from TheMovieDB, TheTVDB and IMDB.
When you use those agents, you only configure them through the Advanced Section in your library. The “Agents” Section in your Plex Server Settings is absolutely meaningless for those new and official Agents because the Agents listed there are based on the old Metadata Agent system written in Python (IIRC the new ones are written in C++ like the rest of Plex).
Also, that Agent section is based on a Priority list, not on an “override” list. This means that the list is being processed from Top to bottom, each agent in that list will provide their own metadata and write that to the Library item but it will only add metadata that doesn’t already exist yet. This means that if the first metadata agent provides a Synopsis for the library item, the next Agent will not override it.
So, with the new Metadata Agents, there is nothing to override and the Agent section can be completely ignored. Only when you use 3rd party metadata Agents, this section would be of interest to you.
Source: I am the developer of the MyAnimeList Metadata Agent for Plex.
I think that it is healthy for a discussion or an argument to have both positive and negative points of view. I also will voice my opinion regardless of the standpoint of the initial question.
However, this also depends on the context. I won’t go into each thread and post something negative just because I don’t like the post or thread. But if someone is asking for an opinion then they should expect that the opinion of others might not be positive or align with their own opinion at all.
I always hate to see those “yes” posts in which every criticism is being downvoted or “banned” but I also hate to see those rants/vent posts just for the circlejerk of hate or negativity.
The problem with brushing on resin is actually not that great because resin for printers will need to be cured. Unless that material is letting the UV light through, only the outer parts will get cured and hold onto the models but when you open it up again the whole middle part would be liquid resin again which stinks and is toxic.
I had this misunderstanding for quite a while myself and though that I can just weld resin party with resin together until I did that with a larger piece and it broke quite easily and seeing that the whole inside wasn’t even touched at all by the UV light.
Hence also why you should shine some UV light into a hollowed model to fully cure it.
CA/superglue should do fine if applied correctly.
I don’t know where I read it but IIRC religion is being used as a simple answer to very difficult and possibly uncomfortable questions: why are we here and what is our purpose?
It is fairly easy to believe that something, a god, created us instead of that the existence of humanity was just a fluke, a stroke of luck enabling us to evolve were we are now because it is just easier to grasp even if it is proven. That we evolved from simple beings into more complex organisms instead of just “being created”. Evolution creates so many quite difficult questions that it is easier to understand and believe that someone just wanted us to exist.
When someone is believing in a religion they also always have some form of " it won’t be over" scenario like when you die, there is nothing truly “the end”. You just won’t vanish and this can be terrifying for many because the following question could be, what sense does it make to live at all when our existence is just so insignificant in comparison to everything else?
So, in short, it is an easy too to make sense of things that almost everyone can understand it.
Unfortunately, things like this can and will be abused.
OP wants to connect a Resin print to a PLA print, not two Filament-printed models together!
Connectivity or rather the lack of it…
I have a Samsung TV and recently got a new cooling fan and now when I start the fan when my TV is on, it says it detected a new device. I don’t know what my TV would want with a fan maybe control the speed for more immersion?
But there is also no way for me to disable that. I also got regular requests of my neighbor’s to connect to my TV until I disabled the notification for it. No, I couldn’t disable that my TV doesn’t even allow it to be seen, I had to enable to not automatically connect devices and disable that notifications are being shown. That thing isn’t even connected to the internet.
I think the biggest problem that people have with NGE is that it just isn’t your typical shounen anime. All of the characters behave in a way because of their past experiences. Shinji being abandoned by his father, witnessing his mother’s death without actually understanding or realising it, asuka being neglected by her mother and Rei being a clone. And all of them in their teens, in a broken world getting told to fight and probably die or humanity is doomed.
With how saturated anime are with flawed main characters that then use that flaw to their advantage to overcome their enemy, NGE just doesn’t do that.
I think that viewers just expect this hero story when they watch it.
I mean. I had a similar impression when I first watched it a long long time ago and thought that shinji was a wuss. But that was after I watched the typical shounen, DB, DBZ, Naruto and bleach. Not to mention that I didn’t understand what the fuck was going on. Only later after watching it a second time and digging into the background a bit, shinjis Oedipus complex, asukas hedgehog dilemma and the general motivation of each of the characters it made a lot more sense. Including the context of their situation made me appreciate the storytelling a lot more because it put everything into perspective.
My phone still doesn’t know what fuck means or suggests it to me when I want to write it even though I use it fairly often. I also daily greet my coworkers over threema and it still hasn’t learned what I want to write when my sausage fingers and the too smal keyboard are at a disagreement what should be written.
The worst thing for me was the loading times just by starting the game.
It took me like 2 minutes to get into the game with my last save and 1.5 minutes are just waiting for the launcher, starting the game and all of the logos and things the game was made with. Even worse some Red dead online event being shown before you are even in the main menu even though I don’t even want to play online.
Depends. I recently was in that situation and it was easier and more cost-effective to just print them.
I recently bought some Lego Star Wars sets and printed out some Display stands for them but the connection between the stands and the model was expected to be a 2x4 Lego plate. I didn’t have those plates at hand so I looked online and found it from the official Lego site.
The individual “Plate 2x4” would cost 0.14EUR each. Since I needed 3 this would be 0.42EUR. But the mailing costs would be over 9EUR.
So ordering 3 of those Lego pieces would cost me almost 10 bucks. I just printed them out which worked well, they were a bit tight fit but are still holding.
But I wouldn’t necessarily say that this is a replacement for actual Lego pieces. As a quick alternative that you can’t see or that has less interaction with other pieces (doesn’t need to fit correctly on all sides) then I think this can work.
so, sooo much.
I currently print some stands for some Lego spaceships. I also have over a TB of models from various Patreons that I support accumulated over the months. I also always find new ones I want to print, but rarely find the time to ACTUALLY print something, anything…
The ability to hide posts that are the exact same but posted in Different places. It is very annoying to browse through 3,4,5 posts with the same text, same image and same poster just in different communities.