I have, conservatively, two dozen playthroughs under my belt at this point, including the original trilogy and remastered versions. If I had to guess, I’d say im about an 85/15 split FemShep over MaleShep. Apparently I’m in the minority, but I much prefer Hale’s performance.
I’m curious as to the paragon vs renegade percentages for each character type. As in, do more people play FemShep as paragon or renegade? Same for MaleShep.
I run a development department, and nobody who reports to me comes to the office. We have been 100% remote since 2020… much to the chagrin of HR. Others in IT come in, but no developers. I see no reason to change it either. I question why I even come in most days.
Without looking it up, I don’t know how many people I’ve interviewed over the last 4 years, but there’s been a few. I’ve only had one person who indicated he wanted to be in an office. Every other person wants fully remote. The most common comment I’ve heard from people is saying they will settle for hybrid if full-remote isn’t available.
There’s some value to having people work together in-person, but I’d rather give my teams the flexibility to choose for themselves rather than force it.
Over a lifetime, 7% to 8% is a good return. If you are safely building a portfolio, and looking at year over year, then anything between 8% and 12% is pretty good. If you are closer to retirement or just more risk averse, then around 5% to 7%. Really, anything above inflation means you are making money.
Everyone is going to have different definitions of “good.” It all depends on your goals, risk aversion, and stage of life. Your best bet is to find a financial advisor who can tailor a plan to your needs.
I think I get where you are coming from here, though I question the certainty in it. There is too much nuance to humanity to never trust or always ignore.
If you never anticipate good in others, you must be very lonely - never trusting, always defensive, waiting for the next attack. We all have different levels of trust shaped by our own experiences. Personally, I try to anticipate good until a person proves otherwise. I’d rather be disappointed occasionally than miss a possible connection to someone because I never anticipated goodness.
As far as receiving advice, take it from anyone and everyone. We constantly do this, even if we don’t notice. We take in the world around us. We decided if it was good, bad, or somewhere in between. If I see someone hit their thumb with a hammer, I learn not to hold the nail in the way way did. It’s non-verbal, yet in its own way, is advice. Verbal advice works similarly. Take it in, listen to it, accept or reject it. Ether way, it is part of you. You will adapt it to your own view. If someone says that jumping of a bridge is the best thing ever, you can ignore them or you can do it. Ignoring them shapes a picture of that person as irresponsible or dangerous while shaping you to be more conscious and risk-averse. Doing it shapes that person in your mind as someone to listen to in order to do something fun. I suppose what I’m getting at is a simple question, can you really ignore advice?
I’m probably just thinking more into it than you intended.
Good luck to you. Post the results when you finish. I’m sure more than just me would like to see it
Shellac is not the same as oil based. Oil based is made from, well, oil. Shelllac is made by crushing the shells of the lac bug. It is an insect that is cultivated specifically for the purpose. Shellac is typically used as a final coat for protection. Shellac primer is basically that mixed with a white pigment. It is great for sealing. Fairly pricy though.
I will echo the Bondo route that others suggested. The big box hardware stores sell quart cans of general purpose Bondo in the paint aisle.
Cut out the vaneer over the bad area with a razor blade or box cutter.
Sand with 80 or 120 grit to remove any loose bits of the board. The particle board will crumble a little, but it will be fine. Just dont go overboard. Vacuum it to remove most dust.
Using a flexible putty knife, get one to two globs of Bondo on a clean piece of cardboard. Don’t do too much as you will have about 5 minutes of working time once the hardener is added. Follow the instructions on how much hardener to add, you wont need much. Fold the hardener into the Bondo with the putty knife until it is a uniform color.
Spread the bondo over the area you cut out. Try to get it smooth, but dont overwork it. It doesn’t have to be perfect.
Using 60 or 80 grit paper, sand it as it starts to dry. If it is gumming up the paper, it is still too wet to sand, give it another minute or two and try again. You are shaping it with this step. If you let it completely dry, it is hard as a rock and more difficult to sand.
Once it is in a good shape, switch to the next step up for sanding and repeat (60 to 80 to 120 to 180 to 220). Do not skip gits or you will just make work for yourself. You can probably stop at 180, but since it is next to vaneer, i’d go to 220. Again, if it is gumming the paper, wait a few minutes. Once you are at 220, use it to sand the entire cabinet to rough up the surface and accept primer better.
Once sanded, wipe the entire cabinet down with a tac cloth. I also recommend wiping the cabinets with a wax and greese remover so everything will stick better.
Now it is time for primer and paint. For a smooth finish, use a good quality foam mini-roller and foam brush for tighter areas.
Prime the cabinet using any water-based primer; killz is pretty good. They make an oil based that would be better, but will smell up your whole house, so I don’t recommend it unless you have excellent ventilation.
Lightly sand the peimer once it is fully dried with 220. If any spot is too light, do a second coat. Wipe up the dust.
Paint with an alkyd paint. Do at least 2 coats.
Not necessary, but if you want extra protection, you could use a foam brush (not a roller here) and do 3 to 4 coats of a water-based polyurethane on top of the paint. It might be overkill for what you want though.
This might seem like a lot, but you will have a great finish when done. Also, fair warning, Bondo has a strong smell. Open a window.
In general, If I need to cut off more than its capacity, I’m using a circular saw with a track or straight edge.
As for the price, I wasn’t aware it was so high. I paid $350 for it. I think it was a holiday sale or something like that.
It wasn’t $500 when I got it. I think it was $350 at the time. Although it might have just been on sale.
This is the one I have. I take the batteries out of it after each use, otherwise it drains it. That’s my only complaint with it.
I inherited an old Delta table saw from the 80’s. The fence on it was in horrible shape when I got it. After a ton of research, I ended up getting the Shop Fox W2005 Classic Fence with Standard Rails.
The fence itself is great. Slides easy. Locks in place and stays there. Easy to adjust.
It took a little time to get aligned properly. After messing with it for a day or so, I bought guage to ensure it is 1/128" off square from the miter slot. Once it was set, I’ve had no issues.
Overall, I highly recommend it, if it is in your budget.
Let me get this straight. You were made fun of by a guy who works for Disney. An organization that’s ridiculously protective of their brand and famous for not being fucked with. One of the most litigious organizations, with an army of lawyers who know more about entertainment law than anyone on the planet. And you’re plan is to sue these people? Good luck.
The 50 to 60 hour week over multiple jobs does happen. However that is not the average nor the norm. Though I’m sure you were using it for effect more than an actual data-point.
According to the Bureau of Labor statistics, for 2023, the average American works 38.5 hours per week. If you drop part-time workers (<35 hrs / wk), a full-time worker does an average of 41.9 hours.
It would take a lot to convince me that they haven’t been discussing this for years and have been waiting for the right time. The market is now loaded with others to do the delivery, which was probably one of the considerations. I’m sure another was how to announce it where they can blame someone else; at least to the point of ensuring some will defend them.
The minimum wage increase is their excuse. What they are doing is outsourcing their delivery to a 3rd party (GrubHub, Uber eats, etc). They wont have to pay them anything, the customer will. They are decreasing their head count, payroll, insurance, taxes, benefits, etc. They will lose some sales, but that wont even be close to their cost savings. They will easily make more money while selling their product at the same price. Any business would love to be in the same position.
I’m pretty sure NPM is Node Package Manager.
XNA, Microsoft’s C# based game dev framework, stood for XNA is Not Acronymed.
“Would have liked to run tests on the sea shells.” ~Mordin Solus (Mass Effect 3)
Why does my neighbor lock the door to his house? What if he is doing something in there I don’t agree with - like praying to a different god than me? How am I supposed to stop him? If I can’t just walk into his house whenever I want, I wouldn’t even know. This type of security can’t stand. Door locks are NSFWorld.
A quarter has 13 weeks, so if you do 2 week sprints and align them to start with a quarter, there is 1 week per quarter that is not accounted for. That week can be used for stuff outside of daily activities. It can be used for training, offsites, working on a pet project, etc. Its a good way to build time in the schedule for this type of thing. These types of breaks have tremendous long term value.
If you are using the concepts and writing the code yourself, you’re fine. If you are copying/pasting code from work to your personal project, you’re commiting IP theft. I’d recommend never doing that. On the otherhand, if it is for a peraonal project that you will never give away or sell, no one will know. Id still recommend not doing it, but to each their own.
If you’re getting water inside, Jchannel is probably the least of your concerns. Something isn’t sealed correctly. Unfortunately, if you have water getting in, you have water in your wall. Even if you seal the window, you could end up with a mold issue.
If it was me, I’d pull the window, ensure all flashing and housewrap is in place, the reseat the window in a thick bead of silicone. Assuming the window is still in good shape. Otherwise, a new window is needed. Once the window is in place, trim, jchannel, and siding would be put back.
Once the window is properly installed, I’d focus on the inside. Pull the trim and drywall around the window, letting it air out for a day then coat the inside sheeting with mold killing primer. New insulation would be added before new drywall is put in. Then mud, sand, paint, and reinstall the trim.
It’s a decent amount of work, but not insurmountable. My concern is, if it was installed incorrectly, chances are, your other windows were too. I’m not trying to be doom and gloom here, just trying to forewarn you. It’s something to keep an eye on.
All of this is assuming the problem isn’t something like a window left open or something like that.