He actually patched it already. WOW!!! So happy to have offline transcoded files back after leaving Plex!

The app works well enough but was unable to watch anything I downloaded offline on iOS. Has anyone experienced this and found a fix? I downloaded from the App Store, not Test Flight.

Thank you. This is great info. I will give this a shot when I can.

Thank you so much for continuing to try and help. It’s greatly appreciated. I am very new to Linux so while I can do some basics, this is very helpful. I installed pyUSB but still get an error when running the script. I have the script placed in my home folder. Should it be elsewhere? The error I get is “No module named ‘usb’. I did adjust the script to have my controller’s proper identification so feels like I’m missing a small piece of the puzzle!

Thank you for the continued effort to help! If I boot into windows and enable the “MB RPM Sync”, the fans are recognized by the BIOS and ramp up and down as needed. This setting does not persist after a shutdown tho. The only way I’ve found to consistently have the fans work as intended after a shutdown is to unplug the USB cable from the Lian Li controller, which kills RGB. I have the PWM connector from the controller going straight into one of the connectors on my mobo. I can tell that after a shutdown, the fans just rotate on their lowest setting, until I open L-Connect 3 again on windows or disconnect the usb port. I’m attempting to implement this: https://github.com/kryzaach/Lian-Li-Unifan-Sync but think I have it placed in the wrong location, as it errors out immediately.

An update: I fiddled with connecting the L-Connect controller to splitters, and a PWM and RGB hub I have and the results are the same: the Lian Li fans are not recognized by the BIOS unless I unplug the USB connection on the Lian Li controller, which kills RGB. When I used the splitter, it actually made my other fans invisible to the BIOS too. Looking closer, I noticed the PWM connector from the Lian Li controller only has 2 pins so I’m assuming it just won’t work without the L-Connect 3 software. Bummer

Thank you so much for the advice but the issue with the Lian Li Uni Fan v2 is that the fan connectors are proprietary and only fit into the controller. The only thing I could split is from the controller and I don’t think that would really change my current situation.

Thank you for the advice! I tried to run the software in Bottles but while I could run the installer, launching the program threw an error 🤷‍♂️

God yes. I could not stomach buying this on Epic

This. I used a P1000 for transcoding and eventually switched to a 12th gen Intel chip with integrated UHD 770 graphics. It completely blew me away. Insanely low power draw and barely breaks a sweat transcoding multiple streams. Consider this route over a GPU if you can.

Antichrist broke me

Really cool list. Thank you for sharing!

Do you have Nginx on the same bridge as Overseerr? If you have multiple docker networks, they need to be on the same so they can discover one another. That bridge also needs internet access so you can generate the cert. Hope this helps

I am so eager to be rid of them. I check for fiber in my area weekly. The fact that they can implement a data cap is ridiculous.

All hail the master https://youtu.be/znSu_FuKFW0?si=3zbwqKA6OpIMPc35

Damn. Account requirements on clothing is a new low. I got my Zigbee hub for $25 so might be worth going that route over replacing 4 bulbs. Happy to help if you have questions!

I’m running Zigbee2MQTT in docker. You could also run HomeBridge docker along side that, eliminating the need for Home Assistant. I still use Home Assistant as my front end but Zigbee is running on a Pi and HomeBridge is on my unraid server. Regardless, look into HomeBridge. It is very powerful for exposing non-HomeKit devices to that platform. I also have multiple Shelly devices and absolutely love them. I just didn’t want to replace my 9 Hue devices needlessly. I’ve been very impressed with the speed of Zigbee2MQTT over the Hue bridge so far.