I wonder if making a blueprint for the floors would be easy enough. Might make the whole thing a lot quicker.

Not OP, but it kind of looks like our Cavachon.

Until they start to force you to connect to “finish” setup. I’m sure it’s only a matter of time.

For now my new LG turns on directly to my external device and isn’t connected to the Internet. I did have to change a setting to turn on to the last input used instead of the useless home screen.

I just fill my insulated tumbler all the way to the top with ice and I get a perfect amount of coffee. It stops right where the lid goes on top.

However, if you were going to do it the normal way it would indeed be about 300g of ice. Then you’d put that over fresh ice (bigger pieces so it doesn’t dilute as much?).

I’m just lazy and also don’t want to use a second container so I just do it my way.

$32 USD a month for 2 lbs (0.9 kg) from a local roaster. Not the most economical, but they do a decent job of roasting.

I do pour over iced coffee (aka Japanese Iced Coffee) using a Hario V60. 35g coffee and 300g water brewed over ice (dilutes the rest of the way and chills the coffee) and I’m good to go.

I think it depends on the volume you intend. I got it for self hosting some things with no problems.

A good case for a charge back.

Not that I’m aware of, but I’m not as knowledgeable as someone else. I’m hoping some quick research or someone better can help. If I remember I can look later on this evening, but can’t at the moment.

Someone more knowledge than me can correct me, but I’m pretty sure you could buy a newer bigger drive to replace an older drive. You obviously wouldn’t get the full capacity as it would be limited by the other older slower drives. However, you would get a, theoretically, more reliable drive than a random one on eBay. Then as you replace older drives eventually you could have increased size.

Caveat is that it will put stress on the old drive to rebuild, however you’d get that with any drive you put in. General wisdom I saw says to replace all the drives. Although that can be expensive.

I’m any case make sure you have a backup before you do any of the changes.

They probably installed the app and not the server.

Thanks for the heads up on that game. Looks fun!

A little off topic, but on first glance I thought that website was called fart caller.

On topic, I’ve never Heard of this service. I still haven’t setup anything like this. Might give it a try.

I can’t updoot you enough. I hate that so much too.

Any recommendations on a casual sneaker? All the ones I have tried are too narrow for my orthotic.

I have lawnchair and it supports work profile. At least as far as I know. I can swipe left/right to see my work apps in the app drawer. Not sure if there’s something else.

I’m running 14 beta 2 https://github.com/LawnchairLauncher/lawnchair/releases

I’ve used freetaxusa the last couple of years. If the IRS one isn’t available, then I’d recommend them.

Another thought. Try the warranty.

https://www.merillat.com/customer-support/warranty-info.html

Edit: Hmm. Says not transferrable. But I suppose it doesn’t hurt to try

Looking at the picture, a regular piece of wood should work as long as the thickness is the same. Otherwise the front will sit a bit proud if thicker, or there will be a gap if thinner. Though you could trim the dado back on the sides if it’s thicker. Edit: and make sure to measure size before trying to take it off. Just in case it breaks more.

It looks like that particle board is nailed to the face. Hopefully it isn’t glued as well, otherwise it’ll be a beast to get off. Those screws are just for the handle and likely have no structural qualities.

I agree, that piece on the back of the face got pretty mangled, and glueing it up honestly wouldn’t be enough long term.