I’ve got several of these empty steel propane tanks from heating the chicken coop during the recent cold weather before I got an adapter to run the heater off of a larger refillable tank. Any ideas on what they could be repurposed for?

Seems like there should be some use for them besides tossing them in the recycling. I’d assume I’d need to poke a hole in them before recycling since they are/were pressure vessels.

I know there are adapters out there to refill them but now that I can use a larger, more easily refillable, tank I don’t really have any inclination to do so.

My only thought so far was to cut the top off, drill some holes, and make a little stick burning camp stove. But, that’s not something I’ll ever use.

I’ve got a fairly extensive workshop and metal working tools so pretty much everything is on the table. I can even do really shitty welding if required.

  • einkorn@feddit.org
    link
    fedilink
    arrow-up
    128
    ·
    5 days ago

    Do not under any circumstances cut into these cylinders with power tools.

    They might not contain enough propane to be useful to you, but there might very well be enough in there to mess you up.

    Brother of a friend wanted to turn an supposedly empty oil barrel into an outdoor heater. The residual fumes were enough to cause an explosion large enough to fracture his skull and put him into a coma for multiple weeks.

    • this_1_is_mine@lemmy.world
      link
      fedilink
      arrow-up
      43
      arrow-down
      2
      ·
      edit-2
      5 days ago

      Thread a torch nozzle and just open it set it in the sun and leave it a couple days the thermal transitions will help purge the bottle enough it doesn’t matter. Drums should always be purged and water filled before cutting or burn it first.

      • Revan343@lemmy.ca
        link
        fedilink
        arrow-up
        7
        ·
        5 days ago

        That’s easy enough on full sized propane bottles, but more of a pain in the ass on the small ones

  • Chainweasel@lemmy.world
    link
    fedilink
    English
    arrow-up
    19
    ·
    edit-2
    4 days ago

    I refill and reuse mine, I got an adapter I can use a grill tank to fill them up with and take them camping for my lantern and camp grill

  • Brkdncr@lemmy.world
    link
    fedilink
    arrow-up
    58
    arrow-down
    3
    ·
    5 days ago

    Nothing. It’s why they are being phased out. recycle them at any place that sells propane tanks.

  • rmuk@feddit.uk
    link
    fedilink
    English
    arrow-up
    26
    ·
    5 days ago

    Put them next to chickens and take a photo that makes it look like you have enormous chickens.

  • BakerBagel@midwest.social
    link
    fedilink
    arrow-up
    8
    ·
    5 days ago

    Under no circumstances should you puncture the container. It’s still a pressure vessel with flammable gas in it and will explode if you try.

  • highlow@lemmy.world
    link
    fedilink
    arrow-up
    5
    ·
    5 days ago

    I used to shoot them with a 30-06. Unfortunately I never got one to go boom like the movies

    • Majorllama@lemmy.world
      link
      fedilink
      arrow-up
      6
      ·
      5 days ago

      You have to tamper with the pressure release safety valves and provide a secondary flame unless you are using some bougie incendiary ammo (and even those aren’t a guarantee to ignite something like propane on its own).

      We used to blow up the normal sized ones like for your the backyard grill. We would fill the pressure release with valve with JB weld and then toss it into a bonfire and shoot it from like 500 feet away lol.