• COASTER1921@lemmy.ml
    link
    fedilink
    English
    arrow-up
    5
    arrow-down
    2
    ·
    9 months ago

    The chemistry from holding that last 20% of charge for a while is what causes the degradation. The BMS can tell the system to stop charging before it’s full but it can’t do anything itself to prevent the cell from slowly being degraded by full charging.

    This is is a problem that occurs on the order of years and that’s why the EV companies care but phones historically don’t. More easily replaceable batteries is the real solution here, not software stopping you from fully charging.

    • Richard@lemmy.world
      link
      fedilink
      English
      arrow-up
      6
      arrow-down
      1
      ·
      9 months ago

      It is not the “real solution”. Increasing the battery longevity is much more sustainable than regularly replacing the battery, and is therefore the most rational and responsible course of action.

      • COASTER1921@lemmy.ml
        link
        fedilink
        English
        arrow-up
        1
        ·
        9 months ago

        Yes, but to increase longevity energy density goes down substantially. Manufacturers (and many users including myself) would not make this decision for something as weight and size sensitive as a phone. The lithium ion batteries currently used already last for 2 years after all and are relatively small. A single model S battery contains 7104 individual cells for comparison. Further, lithium battery recycling has made substantial progress over the last year and will already need to be done at scale when higher volumes of EV batteries have reached their end of life. The impact of the of life phone batteries even from the entire world will be dwarfed by that of the 26 million EVs already on the roads today with thousands of cells each (or equivalent if using prismatic cells).

        Some cars use LiFePO4 batteries for the superior longevity. But the range is reduced to somewhere between 1/2 and 2/3 their lithium ion counterparts. The industry is moving away from this trend in recent years in favor of traditional lithium ion with a software limited charge/discharge range.