Can you link the article so that others can take a look?

Gmail’s search and filters have been annoying for some time now. This feels like an overpowered bandaid to that problem

Manually downloading HTML posts would be more difficult, but it might be possible by parsing the data export you can download from Facebook

Makes me think of Original Position / veil of ignorance

https://en.m.wikipedia.org/wiki/Original_position

The original position (OP), often referred to as the veil of ignorance, is a thought experiment often associated with the works of American philosopher John Rawls. In the original position, one is asked to consider which principles they would select for the basic structure of society, but they must select as if they had no knowledge ahead of time what position they would end up having in that society. This choice is made from behind a “veil of ignorance”, which prevents them from knowing their ethnicity, social status, gender, and (crucially in Rawls’s formulation) their or anyone else’s ideas of how to lead a good life. Ideally, this would force participants to select principles impartially and rationally.

You might already be aware of this, but if not: https://join-lemmy.org/news/2025-02-03_-_Breaking_Changes_in_Lemmy_1.0

The major breaking changes for version 1.0 are already implemented. However it will still take a lot of work to implement the new features in lemmy-ui, and publish the final release. So this is a good time for developers of Lemmy clients to start adapting the new API, and suggest changes before it gets finalized.

Nice 🥳

Oh interesting, I didn’t know that was a thing

Quoting from: https://www.reddit.com/r/synology/comments/1bapfkl

The armv8 architecture which the DS218 uses is supported by Container Manager, Synology just put a hardcoded config into the official package to exclude certain models from installing it:

exclude_model="synology_rtd1296_ds118 synology_rtd1296_ds218 synology_rtd1296_ds218play synology_rtd1296_ds418 synology_rtd1296_ds418j synology_armada37xx_ds119j synology_rtd1296_rs819"

Pretty sure the https://github.com/007revad/ContainerManager_for_all_armv8 linked above just removes the hardcoded exclusion and doesn’t need to change anything else to get it to work.

If that workaround looks shady, you might be better off just installing docker directly

Which Synology NAS is it, and can you install Container Manager on it? That might be the simplest option since your files are already on that device. There should be lots of guides out there for it.

Container Manager is basically a worse DockGE / Portainer by Synology. It should be sufficient for pasting in the Jellyfin docker compose, but if you wanted you could also spin up DockGE/Portainer first and do it through that interface (or SSH into the NAS and do it all with the command line)

So the setup would be

• run Jellyfin as a Docker container on the Synology NAS (using either Container Manager or DockGE/Portainer/straight up command line)
• try it out with the web browser/desktop app/mobile apps to see if you like it
• find a setup that you find convenient for the TV (ex. Android TV apps with some device, the desktop app on the PC, etc)

EDIT: Looks like there are official guides for it, as well as lots of videos on YouTube: https://jellyfin.org/docs/general/installation/synology/

I gather Plex is at least semi-commercial while Jellyfin is the open source but worse option.

I haven’t used Plex enough to judge, but from the comments I’ve seen it seems that Jellyfin is now on par with or better than Plex. There was also some news recently about Plex moving more core features (remote playback?) to the paid plans, so I imagine there will be more people moving over soon.

There are a lot of options for client side apps, official and unofficial, so you might be able to find something specific to your setup

Facebook/Meta made itself to be the de facto method for accessing the internet in the region, and then refused to regulate its engagement-based algorithm as it fueled violence and unrest in the region

https://www.amnesty.org/en/latest/news/2022/09/myanmar-facebooks-systems-promoted-violence-against-rohingya-meta-owes-reparations-new-report/

Facebook owner Meta’s dangerous algorithms and reckless pursuit of profit substantially contributed to the atrocities perpetrated by the Myanmar military against the Rohingya people in 2017, Amnesty International said in a new report published today.

The Social Atrocity: Meta and the right to remedy for the Rohingya, details how Meta knew or should have known that Facebook’s algorithmic systems were supercharging the spread of harmful anti-Rohingya content in Myanmar, but the company still failed to act.

“In 2017, the Rohingya were killed, tortured, raped, and displaced in the thousands as part of the Myanmar security forces’ campaign of ethnic cleansing. In the months and years leading up to the atrocities, Facebook’s algorithms were intensifying a storm of hatred against the Rohingya which contributed to real-world violence,” said Agnès Callamard, Amnesty International’s Secretary General.

Also beautiful places

https://www.theatlantic.com/photo/2019/07/bagan-myanmar-photos/594985/

If you have a moment, do you have any foods from Burma that you would recommend we try someday?

I’m not familiar with tesseract, but if that’s the case then @FundMECFSResearch@lemmy.blahaj.zone you also have the option of https://tes.lemmy.blahaj.zone/

On my end, both were pretty bad

Content moderation seemed to be non-existent, and the reports might as well have gone into the trash

Also no matter how much I tried to control the feed, I’d still get content that was gross (trypophobia), sexual, or chumbox like.

Does it happen with all links, or only some websites? I’ve had this for ages with some websites (ex. CBC), where it’s faster to copy the link URL and paste it in a browser. Other links work fine

Also https://lemmyapps.com/

The description sounds more like an AI receptionist than an AI nurse. It would be helpful if patients could ask follow-up questions to the automated phone call before an appointment. Some clinics don’t have the manpower for that, and especially not in all the languages that the local population might speak.

I’d be interested in seeing how good the model actually is, and how it determines when to pass it along to a human

The concern is with making sure the AI model is only used where it makes sense. Those who are looking to cut costs will try and use it everywhere, and that needs to be kept in check

The GoodKarmaToolkit in particular is an extra project that is managed by ArchiveBox, but the listed services aren’t made by them. I’m not as familiar with ArchiveBox itself, and it looks like there’s an open issue about AI stuff: https://github.com/ArchiveBox/ArchiveBox/issues/1139

There is another called Data Hoarder that does this job too.

Yup, Hoarder was the one I was planning to use for bookmark management: https://hoarder.app/

Maybe Snapchat

I’ve always heard of snapchat being the worst of them all, so maybe it depends on what kind of content you follow?

I with the Pixelfed creator would just focus on Pixelfed, I use that and it’s a total win, just needs some kinks worked out and more popularity.

Now that they have some funding and are building up a small team, it might let them focus on a few things at once. I agree though that it won’t replace Tiktok. At this point, doomscrolling is a psychological addiction that takes effort to move away from.

Yup, the installation guide says to comment out the things you don’t want to run

Wow that looks amazing! Would love the recipe or any tips that you have for making it

Depending on what restrictions you have, you could try VSCode? That’s what students were told to do at my university for remote C / C++ development off the school’s servers

https://code.visualstudio.com/docs/remote/ssh

I’m not familiar with the others, but for vscode

• click the symbol that looks like >< in the bottom left
• potentially install the remote SSH add-on if it asks for it
• log in
• open the left sidebar and tell it to open the folder you are developing in

I imagine it’s because that is the source that the person saw the article on and/or they don’t notice the issue because of adblock/pi-hole.

I’ve done that a few times where I link a site that’s broken without adblockers, or it has a paywall that only shows up part of the time.

Gentle reminders help! It might be cool to have a bot that checks a resource like ground news and links to the same article on a few alternate sources