Many people who start out at a craft or hobby fall into the trap of thinking they need to get the best and most expensive equipment in order to improve or “get good”.
In most cases the better equipment might feel nicer to work with, but doesn’t really improve the performance of their wielder.
The hard truth that can be hard to accept, is that the pro’s are really good because they put a lot of time and effort into getting there. And there really are no shortcuts around that.
Adam Savage has this ideology that if you start a new type of creative hobby, you buy the cheapest tools that has the functions you need. Then when that tool breaks, you buy a nice and expensive version that will last.
Because you have proven that you will use the tool enough to break it.
This works great for a lot of hobbies but not for some. Some hobbies you certainly don’t want your main tool breaking on you. But it kind of applies you don’t need the top of the line to start with but at least opt for solid quality over fancy features.
When you’re starting out, it’s extremely useful to know what your core toolbox needs to include, and who better to ask than someone who clearly knows what they’re doing? Michaelangelo could have said “Well, I use a broad flat chisel for for bulk removal, large and small gouge chisels for soft curves, and mainly a v chisel for the finer details”
When you’re trying to emulate a specific style, sometimes the type of tool can be crucial for nailing the look. For example, Bob Ross used a palette knife extensively, and choose very different brushes for different elements. Even a skilled painter would have difficulty reproducing his work if all they had was one 1-inch flat brush.
That seems like the intent of the artist, but the question alone, literally, can be taken either way. I’m just saying that this interpretation is an over-generalization of the question, implying that it’s always meant as “What brand of tool will magically make me good?”.
Not to take away from your point, but Bob Ross had a few episodes where he deliberately restricted himself to only using a single tool for that week’s painting–as I recall, he used a palette knife exclusively in one episode, and a two-inch flat brush in another. (That said, it also reinforces your point a bit because there’s a HUGE difference between an artist’s 2-inch brush and the two-inch brush you buy from the hardware store, and you’re going to struggle massively if you try to follow along with Bob using a regular brush.)
Yes, and those paintings were distinctive and different. If you tried to follow one of his more detailed paintings with only a palette knife, or one of his mountain scenes with just a fan and a filbert, you won’t get very close. That’s why it’s important to have the right tool(s) for the right job, and how better to find out than asking a talented professional?
If he did, I don’t remember watching that episode. IIRC a big part of Ross’s technique took advantage of the way the fibers on the brush spread when pressed head-on into the canvas, and hardware store brushes just can’t replicate that.
I could use a shoe and my non dominant had to smoke a beginner. But still, if you try to learn something with the worst equipment it can teach bad habits and not be as fun. Far from needing the high end stuff, though. Unless your newly about to pick up high altitude mountain climbing. Might not want to skimp on that one. Lol
if you try to learn something with the worst equipment it can teach bad habits and not be as fun. Far from needing the high end stuff, though
Yeah I think this holds rue for a lot of stuff, if you’re serious about learning, you do need decent equipment, but you don’t need the best, most expensive stuff there is.
Many people who start out at a craft or hobby fall into the trap of thinking they need to get the best and most expensive equipment in order to improve or “get good”.
In most cases the better equipment might feel nicer to work with, but doesn’t really improve the performance of their wielder.
The hard truth that can be hard to accept, is that the pro’s are really good because they put a lot of time and effort into getting there. And there really are no shortcuts around that.
Adam Savage has this ideology that if you start a new type of creative hobby, you buy the cheapest tools that has the functions you need. Then when that tool breaks, you buy a nice and expensive version that will last.
Because you have proven that you will use the tool enough to break it.
I always wanted to get into bungee jumping…
This works great for a lot of hobbies but not for some. Some hobbies you certainly don’t want your main tool breaking on you. But it kind of applies you don’t need the top of the line to start with but at least opt for solid quality over fancy features.
But tools are important to a degree.
When you’re starting out, it’s extremely useful to know what your core toolbox needs to include, and who better to ask than someone who clearly knows what they’re doing? Michaelangelo could have said “Well, I use a broad flat chisel for for bulk removal, large and small gouge chisels for soft curves, and mainly a v chisel for the finer details”
When you’re trying to emulate a specific style, sometimes the type of tool can be crucial for nailing the look. For example, Bob Ross used a palette knife extensively, and choose very different brushes for different elements. Even a skilled painter would have difficulty reproducing his work if all they had was one 1-inch flat brush.
Agreed, but that’s not really how the question in the comic was phrased.
That seems like the intent of the artist, but the question alone, literally, can be taken either way. I’m just saying that this interpretation is an over-generalization of the question, implying that it’s always meant as “What brand of tool will magically make me good?”.
Not to take away from your point, but Bob Ross had a few episodes where he deliberately restricted himself to only using a single tool for that week’s painting–as I recall, he used a palette knife exclusively in one episode, and a two-inch flat brush in another. (That said, it also reinforces your point a bit because there’s a HUGE difference between an artist’s 2-inch brush and the two-inch brush you buy from the hardware store, and you’re going to struggle massively if you try to follow along with Bob using a regular brush.)
Yes, and those paintings were distinctive and different. If you tried to follow one of his more detailed paintings with only a palette knife, or one of his mountain scenes with just a fan and a filbert, you won’t get very close. That’s why it’s important to have the right tool(s) for the right job, and how better to find out than asking a talented professional?
Didn’t Bob use a hardware store brush sometimes?
That said Bob was really the prototypical technique guy that this comment is poking fun at.
If he did, I don’t remember watching that episode. IIRC a big part of Ross’s technique took advantage of the way the fibers on the brush spread when pressed head-on into the canvas, and hardware store brushes just can’t replicate that.
A good teacher will recommend tools that are good enough for the skill level.
Got it, I’ll use this blunted horseshoe nail.
While that’s true, my table tennis rating would definitely drop if I were using a cheap paddle set up.
On the other hand, a beginner would still get smoked.
I could use a shoe and my non dominant had to smoke a beginner. But still, if you try to learn something with the worst equipment it can teach bad habits and not be as fun. Far from needing the high end stuff, though. Unless your newly about to pick up high altitude mountain climbing. Might not want to skimp on that one. Lol
Yeah I think this holds rue for a lot of stuff, if you’re serious about learning, you do need decent equipment, but you don’t need the best, most expensive stuff there is.
Hahah mountain climbing. Yeah, touché!