I would think a simple passive stylus for capacitive touch screens would work fine.
I would think a simple passive stylus for capacitive touch screens would work fine.
You deleted your comments but not the post 🤪
Depending on which slicer you use, you can probably merge them as an assembly. I use Orca Slicer and after loading a model I can then right click on it and add an STL to it. Then it’s a matter of positioning and lining them up. Once done you can slice it as one model.
Figured as much 😜
Surely that wasn’t with the stock hot end though. I’ve done 400 mm/s at 12k mm/s² but I only achieved enough flow after upgrading to a KE style hot end Proof
For simple stuff like this I’ll usually just do it in the slicer. Orca and Prusa slicer have some basic tools for this including using SVGs.
As an android enthusiast, who also is into the 3D printing scene, my first thought was “what does this launcher have to do with OctoPi and OctoPrint?”.
The answer, nothing… obviously. Guess it’s just an SEO and a me problem 🤪
Side loading of apps doesn’t require root 😉
Let’s hope the ones you’re trying to sell on Etsy don’t have this same issue 😜
I just checked and it turns up to date on the November patch so they likely pulled it once shit started hitting the fan.
How is this Android related?
What about the fact that LAN only mode also allegedly still sends logs and data?
It’s more about the fact you settled to go the windows route to solve this. Couldn’t you have just downloaded the profiles from their fork’s GitHub and then import them into the standard version of Orca Slicer? https://github.com/tinymachines3d/Slicer/blob/main/OrcaSlicer/Profiles/Troodon 2.0 OrcaSlicer 1.7.0 Profiles.7z
How do they work?
Sacrificial bridges?
Bambu studio doesn’t have support painting? I’m using it in Orca slicer but maybe that was brought in from prusa slicer.
So I add that as an include from another config. It’s saved me from a few complete failures 😁. For this I was trying to keep it as a basic config for others to use as a good base and I would like to submit a PR, eventually, to include it in klipper’s example configs.
I’m going to look into adding this in, thanks for the tip!
Nigeria Launcher 😲