Wish that the mirror designs you see on trucks for towing was standard, having that second parabolic mirror with a standard mirror is amazing and I’ve had that as my setup forever now on a small car, can see everything in those.
Something like this setup also takes getting used to but seriously worth it.
With exchange it’s closer to $950 cad, best bang for your buck is probably used. Quick glance at kijiji and I saw some 3070tis for sub $400, heck if you’re fine with slightly older hardware just saw a ryzen 3700x + 2070 super, ram, full system honestly for $650 cad. You’ll probably get quite a bit of mileage out of that CPU, I ran with a 3rd gen i5 for nearly a decade
I recall talking to a vendor back… 8 years ago? Who had a colleague trialling hololens augmented maintenance. I personally felt it would be amazing to be able to look at equipment, bring up a model and explode it to get a look at (Yeah I know you can do that with a laptop, manufacturing lines have notoriously shitty wifi, not to mention greasy around equipment), assisted procedures were a cool idea too, helps people who may not be super familiar with your specific equipment, like shift or loaner maintenance people.
Over a decade ago, different company, they had a bounty on video procedures, you’d strap a go pro to your head and record something like changing batteries, replacing o-rings, removal of electronics etc for a cash bonus. I’m a text and photo person but I totally see the value in video documentation.
Microsoft had a demo at an ignite conference in 2020 if I recall of hololens doing ar metrics, person looked at things like the elevator and would give them real-time performance data, definitely a gimmick but I still think AR could be useful in an industrial setting.
If you’re ok with some bulk, go for an nvme enclosure. I have a sabrent one with a 256 GB crucial gen 3 drive in it, it’s a slow cheap drive, still substantially better than any usb key and you can put one together for under $100 cad including a longer high speed cable.
I just did a fresh install off of my usb key and wow, super slow compared to any time I’ve done off my enclosure
My partner and I gave up destiny before witchqueen dropped, played pretty consistently since house of wolves with a pause just before forsaken until shadow keep. Absolutely loved the core mechanics and the PvP is some of my favourite, but it just felt so stale, barely any new maps, sunsetting old ones, lack of committing to ideas (4v4 was actually solid, some of the maps do not play well in 6s, 3s are fine though), rotating gamemode playlists like d1 had (for 6s I find control annoying after a while, 3s I liked relic in d1, mix in elimination and I’d be good)
It’s a shame because as I said, core mechanics rock, slug shorties and hand cannons feel amazing, and fusion rifles are legitimately awesome as well. I have really solid memories of doing stupid things with stuff like the Le Monarque and No Land Beyond. Wasn’t a huge fan of some metas but had some fun times with the games.
While I like Mark Meer for his voice work in other Bioware games (Jade Empire for sure, also I don’t dislike maleshep at all) and his work on stuff like the irrelevant show, Jennifer Hale is just fantastic to the point where renegade femshep is to me the cannon version of Shepard
Afaik the timeline after beating the game splits, the adult timeline carries on from there and then the child timeline carries on as if Gannondorf never took over in the first place
Isn’t windwaker following the adult timeline and twilight princess the kid one but both where Link succeeds?
Guess it kinda makes sense if you think about it as a split at the end of oot? Idk, timeline is wild and I never thought about it too much.
https://openrgb.org/ has decent hardware support
That looks amazing!
Was more a thought about if you are concerned about micro fibre particulate (what I took from your post, sorry if I misunderstood) plastic on plastic or plastic on metal are fine for sure, maybe a little exaggerated. Do wonder though about the wear of 3d printed bushings, surfaces won’t be smooth, some of the glass filled nylon I’ve used has almost a soft surface to it, it’s really hard to describe, some post processing though would probably make my (mild) concern moot though so.
Wrt composites hobbyist/prosumer grade manufacturers (some that target engineering customers in that bucket too) claim they don’t experience the same warping or shrinkage in general, whether or not that’s true I don’t have enough information to tell you unfortunately. Have found both common types definitely have more rigidity, I use them in places where that really matters.
It’s pretty common to see cheap bearings in 3d printed parts, actually mildly interesting to me that bushings don’t seem to be, at least at the hobbyist level. To go further, how many designs do you see with heat set inserts or pressed in nuts?
Shit just even for filament printing, there’s some solvents that get thrown around online that yeah, you really shouldn’t use in a home setting, it’s really easy to get things like MEK, which work, but starting to get into nasty territory for stuff that will dissolve filament.
Most people do not have adequate ppe or ventilation to deal with chemicals at home, or a fire cabinet, or even know how to find an SDS.
Semi related, lithium batteries are straight up terrifying, primary cells more than rechargeables, but same idea, I honestly hope no one ever gets to experience an actual full on cell failure, I avoided them thankfully but heard stories of just how much energy is released in even one C or D sized cell going.
On the composite filaments, abrasive filament sure sounds like a great thing to make wear surfaces out of! There’s a list if things that idk if I’d print, and that’d be up there, ots oil bronze bushings are like, a buck, maybe 2? And they’ll last a hell of a lot longer.
They must be big mad still.
I’m not sure if regedit has changed much either, certainly seems like it’s the same since using it in xp? Odbc windows are 100% 3.1 though.
Feel like task scheduler, event viewer and partitioning tools have been relatively static as well, but they’re not as old as the odbc window. Tbh I’m not surprised that administrative/dev tools haven’t had a ui change.
Not just was Netscape, Mozilla was straight up founded by Netscape people https://en.m.wikipedia.org/wiki/Mozilla
On January 23, 1998, Netscape announced that its Netscape Communicator browser software would be free, and that its source code would also be free.[4] One day later, Jamie Zawinski of Netscape registered mozilla.org.[5] The project took its name, “Mozilla”, from the original code name of the Netscape Navigator browser—a portmanteau of “Mosaic and Godzilla”,[6] and used to coordinate the development of the Mozilla Application Suite, the free software version of Netscape’s internet software, Netscape Communicator.[7][8] Zawinski said he arrived at the name “Mozilla” at a Netscape staff meeting.[9] A small group of Netscape employees were tasked with coordinating the new community.
Do you have an iPhone or any phone with lidar built in? It’s been a while but I recall it being an option for scanning, make use of tools you already have. I’m not sure what exists for Foss related apps though sorry, and afaik they’re not super accurate (dedicated scanners can get <0.01mm resolution from what I’ve seen but they’re expensive) but if your goal is layout that’d do the trick in my view. Heck, as you said, camera scanning would work, there’ll be cleanup but should be good enough to get you dimensions.
Another thought, could check with local makerspaces or the like, totally possible they may have scanners you could use, or could put you on the right track. Diy wise, kinects as mentioned, I’m not experienced with these but there are photogrammetry tools, micmac could work, there’s meshroom but that needs some compute hardware and COLMAP could also be worth looking into
Edit: Photogrammetry is decently accurate afaik, recall sitting in a tech meeting at my last job where the process engineers from the material handling department presented a poc they did with some cheap drones and cheap cameras, they did a fly over of the pier to scan ore piles and apparently were able to get fairly accurate weight estimates from the photogrammetry results, which was really cool to me.
Some monitors have inbuilt KVM switches, have an MSI ultrawide (model escapes me sorry) I bought a few years ago that I use to flip between usbc and dp. Configurable though, could set it up to flip between HDMI and DP and assign usb to whatever one I prefer. It’s way nicer than the switch + swapping inputs manually I had been using.
If you live near a microcenter
I’m like a stone’s throw from the border, if they’re cheaper very much consider crossing for that (closest looks like Detroit though, wrong crossing :/) at least for the tap carriage and mount.
Layer lines are unavoidable imo, I’ve sorta just come to terms, I think I run a tad hot and haven’t fully tuned my profiles, but happy with it for my purposes, and definitely heat soak as well, got a process where I do it right after plate prep/cleanup, then I go do my plating and slicing, gives lots of time.
LEDs I’m mixed on, I moved my gantry cam because they seemingly were aimed right at it and you couldn’t see anything. I keep thinking about a nozzle camera, but with my current setup I really don’t feel like running another umbilical and I’m not 100% sold that it’d survive or really be that handy.
How is the rapido? I’m using dragon HF/UHF for spares and using my existing v6 nozzles, have heard the rapido has some good results.
Are those machined idler blocks‽ if not you have some really solid prints! Impressed with how clean everything is! Just took a shopvac to mine friday, printing parts for a Stealthmax, so lots of buildup.
Need to get into that good enough mindset, definitely caused myself some headache (grabbed a Knomi for the heck of it, tons of interference issues with the blowers I use (sunon and gdstime) but got it going on the fanken-prusa
Instead of running LEDs to the toolhead. It’s cheesy and heavy, but rule of cool right?
If you don’t feel like printing parts, could run the usb umbilical through the chains.
Is your other printer still up? Having a backup has come in really handy.
Be really interested to know what it’s made out of. Had a coworker who used to work in forgings and did some stuff that got sent to nuclear plants, they said that they had really strict requirements on material compositions, specifically needed to ensure that the (think it was steel, may have been something else) material had basically no traces of cobalt in it because the cobalt would becomes radioactive over the service life.