I like the Scandinavian system of fines for breaking the law. They’re scaled based on your annual income so a speeding ticket isn’t just a fee for the wealthy.
Still a fee for the wealthy. If I earn a million a year I can easily give up 90 % of that and still live comfortably. That’s not the case for someone who earns 100,000.
In Denmark if you are charged with hazardous driving the police can confiscate your car. A Norwegian who had bought a Lamborghini in Germany took the trip through Denmark back home and hit 228 km/t km/h. He lost the car and will never get it back.
Sure, and while I think that’s a good idea, it’s not really the same thing. Even though a rich person is more likely to drive a more expensive vehicle, you can have wealthy people driving sensible cars (especially the really wealthy) and lower income idiots, I mean people, having saved up and taken out ridiculous loans to get their expensive dream car that they can’t afford. Confiscating those two vehicles would be the complete opposite of equality in terms of financial pain.
What about the electric socket? I like Type F, but I hate how it doesn’t have replaceable fuse, like Type G. I also think 3-pin should be mandatory. And about electricity, 230V, 50Hz should be the standard.
Over here in India, we have type C, D and M, and they’re decent, I guess. From a safety perspective, it is kinda bad, give how I confused type C slot with type M. This way, I have accidentally bent the two-pin many-a-times.
Type I. The angled pins make it much more stable than F, and there’s heaps of options for cable exiting sideways, upwards, downwards, straight out, etc .
What I like about socket type I is that it has both 2 and 3-pin variants, which is a nice feature. And you’re right about how stable it is, given how the pins are angled.
However, from all the images I’ve seen online, it seems to me that those cables aren’t at the bottom or the top, but toward the center. I mean, if you had something like a sofa or a bed pushed towards the plus, that would cause egregious amount of damage to the plug. Now, I could be in the wrong here.
Also, the ground isn’t tall enough, as screen in type G, D or M, which could be a safety hazard. And the point about the accessible fuse, which is a plus in type G, apparently doesn’t seem to be in any other socket.
In support of type F socket, they’re socketed - as in, a significant part of the plug has to go in first. And this interaction enables the plugs to be grounded first, before any of the other pins come into contact. You’re getting both stability and ground connection at the same time.
This can actually be a bit of an annoyance, sometimes… If the socket is right next to the floor, or in a densely packed area, for example, it can make plugging difficult.
And if it does have a ground pin, it’s mandated that the ground be longer than the power pins, for exactly the reason you mentioned about G,D,M.
The recessed feature of F I do like, even if it makes the plugs physically larger than they need to be.
That’s actually nice that there’s a low-profile plug available. I could see a alternative type socket with recessed plug socket, sideways ground like the Schuko, and the angled pins.
Good choices. Fixed-rate fines are unfair. To someone living on minimum wage, a $500 fine can be devastating. To someone pulling down a huge salary, not so much. They’re essentially unequal punishments for the same violation.
Yup. And not just fines imo. For instance, a cop who rapes or blatantly assaults someone, especially on duty, should have their sentence at least doubled due to the power dynamics.
If the punishment for all of those is death, and one’s power is a multiplier in punishment, one must reasonably assume that everyone has the same level of power.
Metric system, right-hand traffic, ISO 8601, high taxes on the rich, someone’s power being used as a multiplier in punishment.
“I’m afraid you formatted the date incorrectly on this birthday card. Any last words before we hang you?”
This is not 'Nam, there are rules.
IT IS YOUR BIRTHDAY
I would like to add free/accessible healthcare for all
deleted by creator
The money should come from a government, not directly from a patient.
I like the Scandinavian system of fines for breaking the law. They’re scaled based on your annual income so a speeding ticket isn’t just a fee for the wealthy.
Still a fee for the wealthy. If I earn a million a year I can easily give up 90 % of that and still live comfortably. That’s not the case for someone who earns 100,000.
Still better than a flat fee.
($93k vs $9300 for those who prefer USD)
AFAIK, of the Scandinavian countries it’s only Finland that has that system.
In Denmark if you are charged with hazardous driving the police can confiscate your car. A Norwegian who had bought a Lamborghini in Germany took the trip through Denmark back home and hit 228
km/tkm/h. He lost the car and will never get it back.Source (in Danish): https://nyheder.tv2.dk/samfund/2023-12-25-nordmand-fik-beslaglagt-sin-nye-lamborghini-efter-vanvidskoersel-men-naegter-at-acceptere-dommen
Sure, and while I think that’s a good idea, it’s not really the same thing. Even though a rich person is more likely to drive a more expensive vehicle, you can have wealthy people driving sensible cars (especially the really wealthy) and lower income idiots, I mean people, having saved up and taken out ridiculous loans to get their expensive dream car that they can’t afford. Confiscating those two vehicles would be the complete opposite of equality in terms of financial pain.
What about the electric socket? I like Type F, but I hate how it doesn’t have replaceable fuse, like Type G. I also think 3-pin should be mandatory. And about electricity, 230V, 50Hz should be the standard.
Over here in India, we have type C, D and M, and they’re decent, I guess. From a safety perspective, it is kinda bad, give how I confused type C slot with type M. This way, I have accidentally bent the two-pin many-a-times.
Type I. The angled pins make it much more stable than F, and there’s heaps of options for cable exiting sideways, upwards, downwards, straight out, etc .
What I like about socket type I is that it has both 2 and 3-pin variants, which is a nice feature. And you’re right about how stable it is, given how the pins are angled.
However, from all the images I’ve seen online, it seems to me that those cables aren’t at the bottom or the top, but toward the center. I mean, if you had something like a sofa or a bed pushed towards the plus, that would cause egregious amount of damage to the plug. Now, I could be in the wrong here.
Also, the ground isn’t tall enough, as screen in type G, D or M, which could be a safety hazard. And the point about the accessible fuse, which is a plus in type G, apparently doesn’t seem to be in any other socket.
In support of type F socket, they’re socketed - as in, a significant part of the plug has to go in first. And this interaction enables the plugs to be grounded first, before any of the other pins come into contact. You’re getting both stability and ground connection at the same time.
Plenty of type I come out sideways- they are lower profile than most I’ve seen, slightly more so than type G.
https://media.prod.bunnings.com.au/api/public/content/5bac39a3c6d04c53be207f9021e9546b
This can actually be a bit of an annoyance, sometimes… If the socket is right next to the floor, or in a densely packed area, for example, it can make plugging difficult.
And if it does have a ground pin, it’s mandated that the ground be longer than the power pins, for exactly the reason you mentioned about G,D,M.
The recessed feature of F I do like, even if it makes the plugs physically larger than they need to be.
That’s actually nice that there’s a low-profile plug available. I could see a alternative type socket with recessed plug socket, sideways ground like the Schuko, and the angled pins.
Good choices. Fixed-rate fines are unfair. To someone living on minimum wage, a $500 fine can be devastating. To someone pulling down a huge salary, not so much. They’re essentially unequal punishments for the same violation.
Yup. And not just fines imo. For instance, a cop who rapes or blatantly assaults someone, especially on duty, should have their sentence at least doubled due to the power dynamics.
If the punishment for all of those is death, and one’s power is a multiplier in punishment, one must reasonably assume that everyone has the same level of power.
Metric system comes with metric (decimal) time and republican calendar
Don’t forget ISO216 for paper size. It does not make sense that the US is still using “letter” and “legal” paper size.
Why does it matter, just print stuff, supply the correct paper or material for your project, then move on.
We need one more rule: can’t defend cluster fuck murican paper sizes