my assumption is a machined bolt is not as tempered as a store purchased one so using an electric tool on it could strip the head.
Using a hand tool applies less torque so you are less likely to strip it.
“Machined” doesn’t mean “homemade”, it’s a manufacturing method meaning that the threads of the bolt/nut were cut from a smooth piece of metal (as opposed to being cast or forged from a mold). Machined hardware is more likely to have defects like tiny nicks in the threads or bent threads that can damage/ destroy whatever you’re using it to fasten. You can usually tell pretty quickly if you’ve got a shitty bolt or nut if you’re threading it by hand - any irregularities are easy to feel. But if you just blast it with a power drill right off the rip, you won’t feel any of it, and might end up with an unplanned permanent fixture.
my assumption is a machined bolt is not as tempered as a store purchased one so using an electric tool on it could strip the head.
Using a hand tool applies less torque so you are less likely to strip it.
“Machined” doesn’t mean “homemade”, it’s a manufacturing method meaning that the threads of the bolt/nut were cut from a smooth piece of metal (as opposed to being cast or forged from a mold). Machined hardware is more likely to have defects like tiny nicks in the threads or bent threads that can damage/ destroy whatever you’re using it to fasten. You can usually tell pretty quickly if you’ve got a shitty bolt or nut if you’re threading it by hand - any irregularities are easy to feel. But if you just blast it with a power drill right off the rip, you won’t feel any of it, and might end up with an unplanned permanent fixture.
But can I strip…myself??? I WANNA BE NAKED!!!
Not recommended while using power tools.
Based on my posting history, I thought this comment was in reference to pissing and shitting your pants in your sleep.