The Japanese-made trucks have gained a cultlike following, attracting small-business owners seeking affordable alternatives to traditional pickup trucks.
Kei trucks have the same, if not slightly bigger/smaller, bed size as a modern F-150. But they’re basically the size of Honda Fits.
I’ve wanted one since I worked for USPS and learned to drive on the right side of a vehicle. My state does allow you to register them and drive them on the road, but alas, I cannot afford one. :(
Kei trucks only can carry like 800 pounds. I run a bar and regularly take my pickup truck, a 2500, to its bed capacity of roughly 3000 lbs. I’ve had it sitting low just in empties before. A Kei truck can’t even haul my motorcycle if it breaks down. Now someone who’s a full time contractor, would call that thing useless, a farmer might buy one instead of a John Deere gator or side by side. It’d be suitable for golf course maintenance.
It was a backlash to auto manufacturers classifying everything as a truck to get around emissions and fuel economy standards. The fucking PT Cruiser was a “truck” according to Chrysler.
So they started classifying standards based on vehicle footprint with the idiotic hope that would make the manufacturers act better, but the manufacturers realized they could just make cars bigger every refresh cycle to stay ahead of CAFE.
Yeah, a ranger would be ideal for a run around, could even tow my old camper, thing only weighs 3000 lbs. I’d just have to make more frequent beer runs of lesser amounts. At least a ranger can hold an old harley.
Yep, I’m a contractor, I would absolutely only own one to use for work if I had a big property, and it’d be groundskeeping. Just FYI though, Kei trucks are used as contractor/work trucks in Japan, as are Kei vans.
But your average person’s Home Depot trip isn’t going to be close to what a contractor would use. And, just like what currently happens, if your vehicle can’t handle an outlying circumstance, you either rent one that can or have the materials delivered.
So beyond work applications, and towing which most people don’t need the size vehicle they have for what they’re towing, modern pickup trucks are oversized and unnecessary for probably 95% of people.
Ford and Hyundai have tried to bring service to that market with the Maverick and Santa Cruz, respectively. My folks have one and love it, but I’ve found most people still complain because they “don’t need that big if a truck” but then you mention towing/hauling capacity and they say “well why can’t it just tow something small like an F150 does? I’m not trying to get a dually but if I didn’t want to do X then I’d just get a car!” I suspect most people’s “truck needs” would be accommodated but fomo and marketing leads buyers astray even when they already know what they want. Or they’re fickle and just need something to complain about.
The Ranger/B2000, S-10, and first Tacoma were really the sweet spot for compact pickup trucks but you won’t get them back, because all of them got killed by CAFE.
CAFE, safety, larger wheels, more gadgets. These mega corps do their research. Turns out the “real small truck lovers” are a vocal minority, or the things you say you want didn’t include all the things you take for granted in every new car because they just…are.
It’s the same shit as with smartphones. “If people wanted a headphone jack/removable battery/SD slot/whatever then why are they still buying smartphones?” BECAUSE THERE ARE NO OPTIONS THAT HAVE WHAT THEY WANT. I haven’t bought a phone since 2017 and I won’t until forced into it by circumstances. We literally can’t vote with our wallets because what we want isn’t on the ballot.
Look up manufactured consent. When you mix American conservative male identity with American consumerism then it no longer matters that they would prefer smaller trucks. They will buy what’s offered, at the insane price it’s offered. (Pickup truck margin and dealer mark up is one of the highest)
So no, the mere sale of larger vehicles doesn’t mean I’m in a minority. In order to get that data you’d need to have smaller pickups on offer at the same time.
Ford and Hyundai have tried to bring service to that market with the Maverick and Santa Cruz
They didn’t try very hard. The Maverick doesn’t have a single cab or full size bed option and the santa cruz looks like a SUV with 1/4 of the back chopped off.
Here’s a comparison of a 2008 Ranger vs. a 2022 Maverick to show what I mean better. They’re roughly the same size but you lose so much with the Maverick.
2008 RANGER
Height 67.7 in.
Length 203.6 in.
Width 69.4 in.
Wheelbase 125.9 in.
2022 MAVERICK
Height 68.7 in.
Length 199.7 in.
Width 72.6 in.
Wheelbase 121.1 in.
I have a minivan and it carries everything we need. If I put down the back seats, it carries about as much ae a Ford Maverick, perhaps more. I can also fold or remove the middle seats for even more space, which is comparable to a full bed. The only thing it can’t really do is take dumps of mulch, gravel, etc, but it can tow a trailer for that.
What do you find people want to tow? I’m often at a loss when people bring this up because I’ve never once had a moment in my life where I was disappointed by the lack of towing capacity of my small car
What the heck do you need to tow for camping if you have a pickup truck? I can see boats, but boat people buy the towing capacity they need. Not the size of truck.
Is legal here to tow two trailers if the first is 5th wheel. You can bumper hitch a boat behind your camper. This take a fairly serious truck, and is why I have a 5th wheel trailer that’s only 19 feet.
Well yeah. It looks funny when I only tow the camper, as my truck is 21 feet long, the camper 19, and with the fifth wheel setup, the truck appears to dwarf that camper.
Note that Americans basically all drive automatic transmissions, those have a thing called a torque converter. Unless that part is actively cooled it’s going to overheat when asked to do high-torque stuff over prolonged durations and as that active cooling needs space and weight it generally only comes with truck-sized vehicles.
In short: The reason Americans don’t haul caravans and horses and boats with cars is because they can’t drive stick.
Every automatic transmission car sold since the 1970’s and probably earlier has had a transmission cooler, right there alongside or in front of the radiator.
Also all of them have locking torque converters so there is no energy loss at constant speed.
Also also, unless going upward at an incline. Most of the power requirements come from aerodynamic drag, not rolling friction of the trailer.
You can’t lock the converter when accelerating because that’s not a constant speed you’ll stall the motor under the torque load, and to accelerate you need to overcome momentum. Neither drag nor rolling friction are anywhere close to high torque.
And I have no idea what the previous poster meant with a transmission cooler, I guess it’s a different thing because a torque converter very much is not a transmission, if you want to compare it to anything then to a clutch. In any case I’ve got that explanation from an actual American actual car mechanic and random lemmings aren’t going to change my mind especially while making no mechanical sense.
Wow. The remaining 7,950,999,999 people on this planet now have something to be thankful for, because none of them are as wrong as you.
You clearly did not actually understand what your mechanic told you.
A transmission cooler is exactly what it sounds like. It is built exactly like a radiator and works the same way. It is mounted in front of or next to the radiator for the engine. On a lot of newer cars it is actually part of the main radiator. Transmission fluid flows through it and excess heat is dumped into the air. On many vehicles it’s also served by the radiator fan, i.e. for situations where the vehicle is not getting airflow because it’s not moving.
The torque converter is part of your automatic transmission literally operates by moving the transmission fluid. There is no separation between the transmission fluid used in the torque converter and the rest of the transmission where the hydraulic valves use it to actuate the clutch bands, etc. to shift gears. The same bath of transmission fluid is circulated through the torque converter, the rest of the transmission, and the transmission cooler.
This is not a truck thing. Even my dinkum Saturn SL I had when I was a teenager that was so pathetic it was literally made of plastic and did not crack 100 horsepower had a transmission cooler – as designed from the factory. The vast majority of passenger vehicles made in the last half century or more with automatic transmissions have transmission coolers built in. It has nothing to do with towing, either.
Your torque converter absolutely can be locked under acceleration and in fact, nearly all vehicles equipped with a locking torque converter do so as part of their normal shifting pattern when moving up through their gears. This is observable from the driver’s seat if you know what’s happening. The locking and unlocking of the torque converter feels like an “extra gear” in between the gears. Some Japanese cars from the 80’s have a “TC Locked” light on a dash that illuminates when the converter is locked and you can watch this happen in real time. The usual pattern is 1st gear, shift to 2nd gear, lock converter, unlock converter and shift to 3rd, lock converter, unlock converter and shift to 4th, etc. A traditional automatic transmission only has 4 gear ratios, but it will feel like it has seven. Guess why.
Think about it real hard for a minute. A locked torque converter is the same, mechanically, as a fully engaged clutch. If you could not lock the torque converter during acceleration, by the same logic you would not be able to fully release the clutch pedal during acceleration on a manual transmission car, either. It is glaringly obvious that this is not the case.
I am not a “random lemming.” I have four decades of actual real world mechanical experience and have disassembled and rebuilt more transmissions, engines, and vehicles in general than you have probably sat in throughout your entire life.
Neutral to one is a gear change and connecting gear one firmly to the motor is going to stall it when you’re accelerating from standstill. With a petrol engine just the torque needed to get going is going to stall it that’s why you slip the clutch with a manual, a trailer will also stall diesels.
With a torque converter in between you’ll also have to let it slip as it’s serving the function of a clutch. Trying to slip the lock of the converter will kill it pretty much instantly, it’s not build for that so you have to have it unlocked.
I was interpreting “constant speed” as “zero speed difference between motor and drive train” which was probably a bit of a brain fart. You need that slippage to not stall the motor.
A torque converter is part of the whole transmission system even if it’s a separate housing. When you buy a new transmission, it comes with a torque converter.
Torque converters also create the majority of heat in automatic transmissions and are why automatic transmissions get coolers in the first place. How many manuals have you seen with transmission coolers?
You’re right, granted, it’s probably just a bad name.
Then, though, are those cooling systems systems you find in small cars sufficient to cool the thing under sustained high torque loads? Like stop and go city traffic on flat terrain with 2.5t of fully-packed caravan behind it? How much space and weight does it take to beef them up to be able to deliver the same performance of a manual? Is it still sufficient to hook the thing up to the engine cooler, how much more radiator area do you need? Does that even fit a car? Is that why SUVs are designed to hide small kids in front of them? (ok I’ll stop now).
Ah I see! You see I am also American and have an automatic, but don’t have the funds or space for boats, caravans, or horses. I definitely did not know that about the torque converter, so thank you for that info!
I guess I just always assumed that those with the money and land for those activities you listed are wealthy enough to be in the extreme minority, but the way you say this makes me think my friends across the pond have a different perspective. Perhaps I am also in a bit of a bubble, having grown up in and only talk to people in a similar economic class.
Oh boats are definitely a big money thing (unless we’re talking inflatable, even with outboard motor), horses well you just may have a crazy horse girl on your hands – they definitely cost money but are affordable on an insurance clerk’s salary, but caravans aren’t expensive. You can get a decent used one for 5k and camping grounds and cooking for yourself are quite a bit cheaper than hotels and restaurants. Maybe the difference is that over here, people do have vacations.
And simple flatbed trailers are even cheaper, under 1k if you’re lucky, new. If you’re DIYing and are transporting material regularly but don’t want a VW Transporter or such (as most contractors would use) those definitely make a lot of sense.
If that happened I’d buy one. A truck would make a lot of sense for me but I hate the ones that are available so much I couldn’t stomach buying one. I just make due with my old civic and borrowing my dads colorado when I need to move big stuff.
deleted by creator
Kei trucks have the same, if not slightly bigger/smaller, bed size as a modern F-150. But they’re basically the size of Honda Fits.
I’ve wanted one since I worked for USPS and learned to drive on the right side of a vehicle. My state does allow you to register them and drive them on the road, but alas, I cannot afford one. :(
Kei trucks only can carry like 800 pounds. I run a bar and regularly take my pickup truck, a 2500, to its bed capacity of roughly 3000 lbs. I’ve had it sitting low just in empties before. A Kei truck can’t even haul my motorcycle if it breaks down. Now someone who’s a full time contractor, would call that thing useless, a farmer might buy one instead of a John Deere gator or side by side. It’d be suitable for golf course maintenance.
deleted by creator
It was a backlash to auto manufacturers classifying everything as a truck to get around emissions and fuel economy standards. The fucking PT Cruiser was a “truck” according to Chrysler.
So they started classifying standards based on vehicle footprint with the idiotic hope that would make the manufacturers act better, but the manufacturers realized they could just make cars bigger every refresh cycle to stay ahead of CAFE.
Station wagons are classed as trucks, is why the PT Cruiser fell in there.
Yeah, a ranger would be ideal for a run around, could even tow my old camper, thing only weighs 3000 lbs. I’d just have to make more frequent beer runs of lesser amounts. At least a ranger can hold an old harley.
Yep, I’m a contractor, I would absolutely only own one to use for work if I had a big property, and it’d be groundskeeping. Just FYI though, Kei trucks are used as contractor/work trucks in Japan, as are Kei vans.
But your average person’s Home Depot trip isn’t going to be close to what a contractor would use. And, just like what currently happens, if your vehicle can’t handle an outlying circumstance, you either rent one that can or have the materials delivered.
So beyond work applications, and towing which most people don’t need the size vehicle they have for what they’re towing, modern pickup trucks are oversized and unnecessary for probably 95% of people.
ten sheets of 3/4 inch plywood is pushing the capacity of a Kei. That’s right in the middle of homeowner use.
Ford and Hyundai have tried to bring service to that market with the Maverick and Santa Cruz, respectively. My folks have one and love it, but I’ve found most people still complain because they “don’t need that big if a truck” but then you mention towing/hauling capacity and they say “well why can’t it just tow something small like an F150 does? I’m not trying to get a dually but if I didn’t want to do X then I’d just get a car!” I suspect most people’s “truck needs” would be accommodated but fomo and marketing leads buyers astray even when they already know what they want. Or they’re fickle and just need something to complain about.
I drove a 99 Ranger into the ground. It was absolutely fine in every way that truck people care about. Give us back our small trucks!
The Ranger/B2000, S-10, and first Tacoma were really the sweet spot for compact pickup trucks but you won’t get them back, because all of them got killed by CAFE.
CAFE, safety, larger wheels, more gadgets. These mega corps do their research. Turns out the “real small truck lovers” are a vocal minority, or the things you say you want didn’t include all the things you take for granted in every new car because they just…are.
Not me. I’m content to be the minority. My truck is from '99 and newer vehicles annoy the shit out of me.
I don’t want gadgets and I don’t want to need a stepladder to get in it, either. 8’ bed, single cab, crank windows.
It’s the same shit as with smartphones. “If people wanted a headphone jack/removable battery/SD slot/whatever then why are they still buying smartphones?” BECAUSE THERE ARE NO OPTIONS THAT HAVE WHAT THEY WANT. I haven’t bought a phone since 2017 and I won’t until forced into it by circumstances. We literally can’t vote with our wallets because what we want isn’t on the ballot.
Look up manufactured consent. When you mix American conservative male identity with American consumerism then it no longer matters that they would prefer smaller trucks. They will buy what’s offered, at the insane price it’s offered. (Pickup truck margin and dealer mark up is one of the highest)
So no, the mere sale of larger vehicles doesn’t mean I’m in a minority. In order to get that data you’d need to have smaller pickups on offer at the same time.
They didn’t try very hard. The Maverick doesn’t have a single cab or full size bed option and the santa cruz looks like a SUV with 1/4 of the back chopped off.
Here’s a comparison of a 2008 Ranger vs. a 2022 Maverick to show what I mean better. They’re roughly the same size but you lose so much with the Maverick.
2008 RANGER Height 67.7 in. Length 203.6 in. Width 69.4 in. Wheelbase 125.9 in.
2022 MAVERICK Height 68.7 in. Length 199.7 in. Width 72.6 in. Wheelbase 121.1 in.
the 2008 ranger is such a nice truck. Maverick is just a minivan with an open trunk. Might as well just get a real minivan.
I have a minivan and it carries everything we need. If I put down the back seats, it carries about as much ae a Ford Maverick, perhaps more. I can also fold or remove the middle seats for even more space, which is comparable to a full bed. The only thing it can’t really do is take dumps of mulch, gravel, etc, but it can tow a trailer for that.
Minivans are fantastic.
I drive a 98 Ranger XLT, it has a 5900 lb towing capacity. I’m pretty much going to keep fixing it forever.
What do you find people want to tow? I’m often at a loss when people bring this up because I’ve never once had a moment in my life where I was disappointed by the lack of towing capacity of my small car
Camping. Boats. Moving furniture. Gay party floats. The list goes on.
What the heck do you need to tow for camping if you have a pickup truck? I can see boats, but boat people buy the towing capacity they need. Not the size of truck.
Is legal here to tow two trailers if the first is 5th wheel. You can bumper hitch a boat behind your camper. This take a fairly serious truck, and is why I have a 5th wheel trailer that’s only 19 feet.
Yeah, but the second you need a fifth wheel then you need a pickup truck bed to put the receiver in.
Well yeah. It looks funny when I only tow the camper, as my truck is 21 feet long, the camper 19, and with the fifth wheel setup, the truck appears to dwarf that camper.
Note that Americans basically all drive automatic transmissions, those have a thing called a torque converter. Unless that part is actively cooled it’s going to overheat when asked to do high-torque stuff over prolonged durations and as that active cooling needs space and weight it generally only comes with truck-sized vehicles.
In short: The reason Americans don’t haul caravans and horses and boats with cars is because they can’t drive stick.
?
Every automatic transmission car sold since the 1970’s and probably earlier has had a transmission cooler, right there alongside or in front of the radiator.
Also all of them have locking torque converters so there is no energy loss at constant speed. Also also, unless going upward at an incline. Most of the power requirements come from aerodynamic drag, not rolling friction of the trailer.
You can’t lock the converter when accelerating because
that’s not a constant speedyou’ll stall the motor under the torque load, and to accelerate you need to overcome momentum. Neither drag nor rolling friction are anywhere close to high torque.And I have no idea what the previous poster meant with a transmission cooler, I guess it’s a different thing because a torque converter very much is not a transmission, if you want to compare it to anything then to a clutch. In any case I’ve got that explanation from an actual American actual car mechanic and random lemmings aren’t going to change my mind especially while making no mechanical sense.
Wow. The remaining 7,950,999,999 people on this planet now have something to be thankful for, because none of them are as wrong as you.
You clearly did not actually understand what your mechanic told you.
A transmission cooler is exactly what it sounds like. It is built exactly like a radiator and works the same way. It is mounted in front of or next to the radiator for the engine. On a lot of newer cars it is actually part of the main radiator. Transmission fluid flows through it and excess heat is dumped into the air. On many vehicles it’s also served by the radiator fan, i.e. for situations where the vehicle is not getting airflow because it’s not moving.
The torque converter is part of your automatic transmission literally operates by moving the transmission fluid. There is no separation between the transmission fluid used in the torque converter and the rest of the transmission where the hydraulic valves use it to actuate the clutch bands, etc. to shift gears. The same bath of transmission fluid is circulated through the torque converter, the rest of the transmission, and the transmission cooler.
This is not a truck thing. Even my dinkum Saturn SL I had when I was a teenager that was so pathetic it was literally made of plastic and did not crack 100 horsepower had a transmission cooler – as designed from the factory. The vast majority of passenger vehicles made in the last half century or more with automatic transmissions have transmission coolers built in. It has nothing to do with towing, either.
Your torque converter absolutely can be locked under acceleration and in fact, nearly all vehicles equipped with a locking torque converter do so as part of their normal shifting pattern when moving up through their gears. This is observable from the driver’s seat if you know what’s happening. The locking and unlocking of the torque converter feels like an “extra gear” in between the gears. Some Japanese cars from the 80’s have a “TC Locked” light on a dash that illuminates when the converter is locked and you can watch this happen in real time. The usual pattern is 1st gear, shift to 2nd gear, lock converter, unlock converter and shift to 3rd, lock converter, unlock converter and shift to 4th, etc. A traditional automatic transmission only has 4 gear ratios, but it will feel like it has seven. Guess why.
Think about it real hard for a minute. A locked torque converter is the same, mechanically, as a fully engaged clutch. If you could not lock the torque converter during acceleration, by the same logic you would not be able to fully release the clutch pedal during acceleration on a manual transmission car, either. It is glaringly obvious that this is not the case.
I am not a “random lemming.” I have four decades of actual real world mechanical experience and have disassembled and rebuilt more transmissions, engines, and vehicles in general than you have probably sat in throughout your entire life.
Drop the mic, bro. You earned it.
Which stalls the motor under high torque load.
Torque converters use transmission fluid to operate, that tranny fluid goes through a cooler.
No, you can accelerate and deccelerate. Only needs to unlock for gear changes.
Only in city would the torque converter spend an appreciable amount of time unlocked but then again, in the city you won’t be moving fast either
Neutral to one is a gear change and connecting gear one firmly to the motor is going to stall it when you’re accelerating from standstill. With a petrol engine just the torque needed to get going is going to stall it that’s why you slip the clutch with a manual, a trailer will also stall diesels.
With a torque converter in between you’ll also have to let it slip as it’s serving the function of a clutch. Trying to slip the lock of the converter will kill it pretty much instantly, it’s not build for that so you have to have it unlocked.
I was interpreting “constant speed” as “zero speed difference between motor and drive train” which was probably a bit of a brain fart. You need that slippage to not stall the motor.
A torque converter is part of the whole transmission system even if it’s a separate housing. When you buy a new transmission, it comes with a torque converter.
Torque converters also create the majority of heat in automatic transmissions and are why automatic transmissions get coolers in the first place. How many manuals have you seen with transmission coolers?
You’re right, granted, it’s probably just a bad name.
Then, though, are those cooling systems systems you find in small cars sufficient to cool the thing under sustained high torque loads? Like stop and go city traffic on flat terrain with 2.5t of fully-packed caravan behind it? How much space and weight does it take to beef them up to be able to deliver the same performance of a manual? Is it still sufficient to hook the thing up to the engine cooler, how much more radiator area do you need? Does that even fit a car? Is that why SUVs are designed to hide small kids in front of them? (ok I’ll stop now).
They stopped SELLING THEM TO US!!!
Ah I see! You see I am also American and have an automatic, but don’t have the funds or space for boats, caravans, or horses. I definitely did not know that about the torque converter, so thank you for that info!
I guess I just always assumed that those with the money and land for those activities you listed are wealthy enough to be in the extreme minority, but the way you say this makes me think my friends across the pond have a different perspective. Perhaps I am also in a bit of a bubble, having grown up in and only talk to people in a similar economic class.
Oh boats are definitely a big money thing (unless we’re talking inflatable, even with outboard motor), horses well you just may have a crazy horse girl on your hands – they definitely cost money but are affordable on an insurance clerk’s salary, but caravans aren’t expensive. You can get a decent used one for 5k and camping grounds and cooking for yourself are quite a bit cheaper than hotels and restaurants. Maybe the difference is that over here, people do have vacations.
And simple flatbed trailers are even cheaper, under 1k if you’re lucky, new. If you’re DIYing and are transporting material regularly but don’t want a VW Transporter or such (as most contractors would use) those definitely make a lot of sense.
If that happened I’d buy one. A truck would make a lot of sense for me but I hate the ones that are available so much I couldn’t stomach buying one. I just make due with my old civic and borrowing my dads colorado when I need to move big stuff.
I got one off of marketplace in great condition for a good deal. It is very practical and fun to drive. Also you get a lot of looks.
I’m in the “hatchback car or tiny truck” market for my next car.